STEINEL 089191 (115 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to switch between manual and bus operation?
To switch to manual operation, press the 'Ǖ' button for at least 5 seconds. The LED will light up, indicating manual mode. To return to bus operation, press the 'Ǖ' button for at least 5 seconds again. The LED will turn off, and bus operation is reactivated.
How to dim a lamp using the actuator?
To dim a lamp, press the 'ON|+' or 'OFF|−' buttons. A short press toggles the lamp on or off. A long press dims the lamp brighter or darker. Release the button to stop dimming. The LED indicators will show the current status.
What happens if the power supply is interrupted for more than 5 seconds?
If the power supply is interrupted for more than 5 seconds, the dimmer will automatically shut down. Upon power restoration, the connected load will be re-measured based on the parameter settings.
How to lock an output during manual operation?
To lock an output, press the 'ON|+' and 'OFF|−' buttons simultaneously for at least 5 seconds. The selected output will be locked, and the status LED will blink rapidly. A locked output can still be operated manually.
What are the technical specifications of the actuator?
The actuator supports dimming of various loads such as incandescent lamps, halogen lamps, dimmable LED lamps, and dimmable transformers. It is compatible with KNX systems, has a built-in KNX Data Secure feature, and can be updated via the STEINEL KNX Service App. It also includes a status LED for output feedback.
How to handle a short circuit?
If a short circuit occurs, the status LED will blink at 2 Hz. The actuator will automatically detect the fault and may shut down to protect the connected load. Ensure the power supply is disconnected and check the connected devices for any faults.
Can the actuator be used with inductive transformers?
Yes, the actuator can be used with inductive transformers, but it is important to follow the manufacturer's specifications for the transformer. Ensure the transformer is properly rated for the connected load and dimming principle to avoid damage.
How to configure the actuator for a specific load type?
Before connecting a load, ensure the correct dimming principle is set on the actuator. This can be done through the programming interface or via the ETS software. The actuator supports various dimming principles to match different load types, such as LED or halogen lamps.
What is the maximum number of outputs that can be paralleled?
Parallel outputs can be connected, but they should not be loaded beyond 95% of their capacity. Connecting compact fluorescent lamps to parallel outputs is not allowed. Ensure all parallel outputs are connected to the same external conductor to avoid short circuits.
How to update the firmware of the actuator?
Firmware updates can be performed using the STEINEL KNX Service App. Connect the actuator to the network, open the app, and follow the on-screen instructions to download and install the latest firmware version. Ensure the actuator is in a stable power supply during the update.