U.S. Robotics MAXg USR5461 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect the Wireless MAXg Router?
Turn off your computer and modem. Disconnect the modem's Ethernet cable and connect it to the WAN port of the Wireless MAXg Router. Connect the Ethernet cable to your computer's Network Interface Card and a LAN port on the router. Attach the antenna and power adapter, then turn on your computer.
How do I install the Wireless MAXg USB Adapter?
Insert the USB Adapter Installation CD-ROM into your computer's CD-ROM drive. Launch the installation program, select your preferred language, and follow the on-screen instructions. When prompted, insert the USB Adapter into an available port and restart your computer.
How do I set up a wireless network?
After restarting, select 'Configure a new U.S. Robotics Wireless MAXg Router' and follow the prompts. Choose your internet connection type, enter a network name and pass phrase for encryption, and wait for the router and adapter to configure. Save the settings to a text file for future reference.
How do I access the Configuration Utility?
A small icon will appear in your system tray. Right-click the icon and select 'Open Utility' or left-click to open the quick connect screen. From there, you can select a network, enter the network key, and click 'Connect' to establish a wireless connection.
How do I connect a USB printer to the router?
Plug the USB cable into the printer and the Wireless MAXg Router. Use a web browser to access the router's web interface at http://192.168.2.1. Note the printer's network address from the Status page. Add the printer as a network printer on each connected computer and follow the setup wizard.
How do I verify the printer connection?
Check the printer status on the Web User Interface. If it shows 'Ready', your printer is connected. Click 'Print this page' in the Help area to test. If it shows 'Not Ready', ensure the printer is on and the USB cable is securely connected. Repeat the setup if needed.
How do I register my Wireless MAXg Router and USB Adapter?
Register your products online at http://www.usr.com/productreg. This helps ensure you receive updates and support for your devices.
Why can't I access the Internet?
Check the indicator lights on your computer, router, and modem. Ensure the wireless utility shows a good connection to your router. Verify that the router's power, wireless, and Internet LEDs are lit. If the modem is not connected to your ISP, the router will not have Internet access.
What should I do if my wireless connection is unstable?
Ensure the wireless utility reports a successful connection. If connected to the wrong router, use the utility to check the network name (SSID) and force a connection to your router. Also, make sure the antenna is properly attached and the signal strength is adequate.
How do I troubleshoot a failed printer setup?
Ensure the printer is turned on and the USB cable is securely connected. Check the network address in the printer's Status page and enter it exactly as displayed. If the printer still does not connect, repeat the setup process and verify all entered information is correct.