Multiplex EASYCUB (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to check motor and propeller security before flight?
Before every flight, ensure the motor and propeller are securely attached, especially after transport, hard landings, or crashes. Verify the wing is correctly positioned and firmly secured on the fuselage.
When should the battery be connected?
Connect the battery only when the transmitter is switched on and the motor control is set to 'OFF' to prevent accidental activation.
How to check motor temperature after flight?
After each flight, check the motor temperature by gently touching it with your finger. Allow the motor to cool sufficiently before the next flight. The temperature is correct if you can hold your finger on the motor without difficulty.
What safety precautions are necessary during flight?
Avoid placing fingers near the propeller, keep spectators at a safe distance, and never fly towards people or animals. Ensure the model is not in the propeller's rotation area during operation.
What components are required for the EasyCub model?
The EasyCub requires a MULTIPLEX receiver (RX-7-Synth IPD or RX-6-Synth light), two Tiny S or Tiny MG servos, a motor, propeller, and battery. Specific part numbers are provided in the manual.
What type of adhesive is recommended for assembly?
Use only medium viscosity cyanoacrylate or fast-acting adhesive. Avoid white glue, polyurethane, or epoxy, as they may not adhere properly and can peel off under stress.
How to adjust the control surfaces for balanced flight?
Set the rudder deflection to 15 mm for the ailerons and 12 mm for the elevator. Measure from the deepest point of the control surfaces. Adjust the linkage connections if the range does not match the transmitter capabilities.
How to determine the center of gravity for stable flight?
The center of gravity should be 80 mm from the leading edge of the wing. Use a balance scale or fingers to ensure the model is level. Adjust the battery position to achieve the correct balance.
What is the recommended procedure for the first flight?
Wait for a windless day and perform a range test before the first flight. Ensure the transmitter and battery are fully charged. Test the control response with the motor off and verify that the model responds correctly to inputs.
How to start the model from the ground?
Start the model against the wind, pull the elevator fully back, accelerate slowly, and correct the direction with the tail wheel or rudder. Maintain steady acceleration and lift off once the speed is sufficient.
Related products from Multiplex
Magister
User manual 60 pages
Cularis
User manual 11 pages
MULTIflight Stick
User manual 10 pages
SKY-CAT
User manual 12 pages
SKY-CAT
User manual 24 pages
ParkMaster
User manual 14 pages
Twister
User manual 14 pages
Twister
User manual 32 pages
PICO-JET
User manual 28 pages
Xeno
User manual 32 pages
SPACE SCOOTER
User manual 32 pages
1-02130
User manual 36 pages
TOMMY jr.
User manual 36 pages
parkmaster 3D
User manual 40 pages
Twin Star II
User manual 40 pages
Merlin
User manual 40 pages
EXTRA 300S
User manual 40 pages
Dog fighter
User manual 40 pages
DogFighter SR
User manual 42 pages
Pilatus PC 6
User manual 44 pages