ABB MS132-B (5 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the primary function of the ABB MS132-B thermal overload relay?
The ABB MS132-B protects motors by monitoring current and tripping when overloads, phase failure, or unbalanced currents occur. It prevents motor overheating and damage, improves system safety in remote-start setups, and reduces downtime through reliable automatic protection.
How do I set the current range on the MS132-B for different motor sizes?
Adjust the relay’s current selector to match the motor’s full-load current (FLA). Set slightly above the motor FLA to avoid nuisance trips while maintaining protection. Verify coordination with the contactor and recheck after commissioning or load changes.
Can the MS132-B detect phase failure and how does it respond?
Yes, the MS132-B senses phase loss by monitoring current imbalance and will trip when a phase failure creates unacceptable unbalance. Tripping prevents overheating and winding damage, making it essential in three-phase remote-start installations.
What reset options does the MS132-B offer and when should I use each?
The relay provides manual and automatic reset modes. Use manual reset for hazardous or hard-to-access loads to confirm safe conditions before restart; use automatic reset where quick recovery is needed, ensuring proper fault verification and safety interlocks.
How do I integrate the MS132-B with a standard contactor in a remote start circuit?
Mount the MS132-B in series with the contactor coil control circuit so its trip opens the coil circuit. Ensure electrical and mechanical compatibility, wire the relay’s trip auxiliary contacts to the starter logic, and test coordination under realistic load.
What are common causes of nuisance tripping and how can I prevent them?
Nuisance trips often stem from high inrush currents, incorrect current setting, temporary voltage dips, or wiring faults. Prevent them by selecting correct setting, allowing inrush tolerance, improving supply stability, and checking connections and contactor performance.
How often should the MS132-B be inspected and what maintenance is required?
Inspect visually and functionally at regular intervals, typically quarterly to annually depending on environment. Check terminals, contacts, and mechanical condition, perform functional trip tests, and clean or tighten connections to maintain reliable protection.
What ambient and electrical conditions should be observed for reliable operation?
Operate the relay within its specified voltage, current and ambient temperature ranges, and avoid excessive humidity, vibration, or contamination. Install in a protected enclosure if necessary and derate settings in high-temperature environments for consistent performance.
How does the MS132-B react to unbalanced currents and why is that important?
The relay monitors current imbalance and trips when unbalance exceeds its threshold, preventing rotor heating and stator insulation damage. Detecting unbalance early protects motor life and avoids mechanical stress, important in remote-start and variable-load applications.
What steps should I take to troubleshoot a repeatedly tripping MS132-B?
Verify motor current with a clamp meter, inspect for mechanical jams or overloads, check supply voltage and phase presence, confirm correct relay setting and contactor condition, and replace faulty wiring or components found during diagnosis.