Log in


or


google Continue with Google

Already have an account?

BRAX GX2400 (24 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 13
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product description:

The BRAX GX2400 is a 4-channel amplifier designed for high-fidelity audio applications. It delivers up to 600 watts of total power output, with each channel capable of handling 150 watts at 4 ohms. The device features a frequency response ranging from 10 Hz to 40 kHz, ensuring precise sound reproduction across the audible spectrum. Key specifications include a high signal-to-noise ratio of over 90 dB and low total harmonic distortion below 0.05%, which minimizes audio artifacts. It supports multiple input options, such as RCA connections, and incorporates built-in protection features like thermal overload and short-circuit safeguards. Constructed with durable components, the amplifier is compact and suitable for installation in various setups, providing reliable performance for demanding audio systems.

Frequently Asked Questions

What power output does the BRAX GX2400 deliver per channel and in total?

The BRAX GX2400 provides up to 150 watts RMS per channel at 4 ohms, for a combined total output rating of 600 watts. This rating describes continuous power under specified load conditions and helps size speakers and power supply for reliable, distortion-free performance.

Which speaker impedances are supported and which are recommended?

The amplifier is rated at 4 ohms per channel, which is the specified load for its 150 W/channel rating. Using significantly lower impedances can increase current draw and thermal stress, so match speakers at or above 4 ohms unless the amp explicitly lists safe operation at lower impedances.

How does the 10 Hz–40 kHz frequency response affect the sound?

A 10 Hz to 40 kHz frequency response ensures accurate reproduction across the full audible band and beyond, preserving low bass and high-frequency detail. This wide response supports natural timbre and clarity, particularly for high-fidelity systems and demanding source material.

What do the signal-to-noise ratio and THD specifications mean for listening?

A signal-to-noise ratio above 90 dB indicates low background noise relative to the audio signal, while THD below 0.05% means very low distortion. Together they ensure transparent, clean playback with minimal audible artifacts, improving clarity at both low and high listening levels.

Which input connections does the GX2400 provide and how are they used?

The GX2400 offers standard RCA input connections for line-level signals, allowing integration with most preamps and head units. Use quality shielded RCA cables and maintain neat routing away from power cables to minimize interference and preserve signal integrity.

What built-in protection features protect the amplifier and speakers?

The amplifier incorporates thermal overload and short-circuit protection to prevent damage from excessive heat or electrical faults. These protections help the unit shut down or limit output in fault conditions, preserving internal components and connected speakers from permanent failure.

How should I mount the amplifier to ensure proper cooling and reliability?

Mount the amplifier in a well-ventilated location with clearance around heat-dissipating surfaces and away from direct heat sources. Ensure air can circulate freely, avoid enclosed boxes without ventilation, and orient the unit per cooling design to reduce thermal stress during high-power operation.

What power wiring and fusing guidelines should I follow for safe operation?

Use appropriately sized power and ground cables rated for the amplifier’s maximum current draw, with a close-mounted main fuse in the positive feed. Secure solid connections, avoid long thin wires that cause voltage drop, and ensure the vehicle or system power source can support continuous high current.

What are common troubleshooting steps if there is no sound or distortion?

Check power and ground connections, fuses, input signal presence at RCA inputs, speaker wiring continuity, and whether protection LEDs indicate faults. Also ensure the amp is not thermally overloaded; restoring correct wiring and ventilation often resolves most no-sound or distortion issues.

How can I maintain the BRAX GX2400 to extend its service life?

Regularly inspect wiring and mounting hardware, keep cooling fins and ventilation free of dust, and avoid prolonged operation at maximum power without adequate ventilation. Using clean, secure connections and protecting the unit from moisture and vibration reduces component stress and extends operational longevity.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.