Eton MICRO 120.2 (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What power output does the Eton MICRO 120.2 deliver per channel?
The Eton MICRO 120.2 delivers up to 60 watts RMS per channel into a 4 ohm load, providing steady continuous power for typical car speakers. This rating is ideal for improving clarity and headroom without distortion when gains are set correctly.
Can the MICRO 120.2 be used in bridged mode for higher output?
Yes, the MICRO 120.2 supports bridged mode to increase output for driving a single speaker with more power. When bridging, be sure the speaker impedance and wiring meet the amplifier's bridged-load limits to avoid overheating or triggering protection circuits.
What speaker impedance is recommended for best performance?
The amplifier is optimized for 4 ohm speakers and will deliver its rated 60 watts RMS at that impedance. Using significantly lower impedances increases current draw and may activate protection; higher impedances reduce available power and output level.
How do the variable high-pass and low-pass filters improve sound?
Variable high-pass and low-pass crossovers let you tailor the frequency band sent to each speaker, reducing distortion and improving clarity. Use the high-pass for full-range speakers to remove deep bass and the low-pass for subwoofers to concentrate power where needed.
Which inputs and connections does the amplifier provide?
The unit includes standard line-level RCA inputs and dedicated power and speaker terminals designed for automotive use. Secure, correct polarity connections and a reliable chassis ground are essential for noise-free operation and consistent performance.
How does the built-in protection circuitry prevent damage?
Built-in protection detects overloads and excessive temperature, then limits output, mutes, or temporarily shuts the amplifier down until conditions normalize. This preserves internal components and connected speakers, and typically resets automatically after the unit cools.
What are the amplifier's frequency response and distortion characteristics?
The MICRO 120.2 typically offers a wide frequency response from about 10 Hz to 40 kHz and low total harmonic distortion for clear, accurate reproduction. This wide response suits both full-range speakers and subwoofers when crossovers are set appropriately.
Is the MICRO 120.2 suitable for tight installation spaces in vehicles?
Yes, the amplifier's compact design and lightweight construction (approximately 1.5 kg) make it well suited for confined locations. Allow adequate ventilation and avoid mounting directly on heat-absorbing surfaces to maintain thermal performance.
What power supply and wiring does the amplifier require for safe operation?
The amplifier runs from a 12-volt DC automotive supply. Use appropriately gauged power and ground cables, a correctly rated fuse located near the battery, and a secure ground to minimize voltage drop and protect against short circuits.
How should I maintain the amplifier and troubleshoot common issues?
Maintain good ventilation, secure all connections, and keep RCA contacts clean. For noise or shutdowns, check grounding, wiring gauge, speaker impedance, and fuses. If overheating occurs, reduce gain or improve airflow and verify there are no shorted speaker leads.
Related products from Eton
ECS 500.4
User manual 10 pages
FORCE FA 4500
User manual 10 pages
MA 500.1
User manual 10 pages
SDA 750.1
User manual 10 pages
ECS 1200.1
User manual 10 pages
ECS 300.2
User manual 10 pages
FORCE FA 3500
User manual 10 pages
ECC 1200.1
User manual 12 pages
ECC 500.4
User manual 12 pages
PA 5002
User manual 12 pages
ECC 600.2
User manual 12 pages
SDA 100.4
User manual 12 pages
PA 504
User manual 12 pages
ECC 300.2
User manual 12 pages
SDA 150.4
User manual 12 pages
PA 1002
User manual 12 pages
ECC 600.4
User manual 12 pages
SDA 100.6
User manual 12 pages
PA 502
User manual 12 pages
AM300
User manual 16 pages