Plantronics A20 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect the headset to the telephone?
To connect the headset, first remove the handset cable from the telephone and plug it into the Handset Cable Port (16). Then connect one end of the Base Unit Cable (11) to the Base Unit Cable Port (20). Connect the AC Power Supply (14) to the AC Adapter Port (18) and a wall outlet. Finally, connect the OLI (15) to the Accessory Port (19).
How do I assemble the amplifier and accessory deck?
Attach the Amplifier (21) to the Accessory Deck (13) by fully expanding the deck and clipping the amplifier into the two exposed slots at the front. Organize cables by pressing them into the molded slots. Ensure the telephone is placed on the Accessory Deck (13) and the other end of the Base Unit Cable (11) is connected to the telephone’s Handset Port.
How do I adjust the listen volume?
To adjust the listen volume, press the Mode Selector (4) to highlight the Listen Volume Indicator (8). Then use the Volume Rocker Switch (3) to increase or decrease the volume. This controls how others sound to you during a call.
How do I adjust the speak volume?
To adjust the speak volume, press the Mode Selector (4) to highlight the Speak Volume Indicator (9). Then use the Volume Rocker Switch (3) to increase or decrease the volume. This controls how you sound to others during a call.
How do I switch between modes on the amplifier?
To switch between Listen, Speak, and Tone modes, press the Mode Selector (4) until you reach the desired mode. The LED on the display will indicate the active mode. The default mode is Listen, and it will revert to this mode after 10 seconds of inactivity.
How do I configure the amplifier for optimal performance?
To configure the amplifier, place a call to a co-worker and while speaking, turn the Configuration Dial (12) clockwise until you achieve the best sound quality. A paper clip can be used to make turning the dial easier. Experimenting with these settings will not damage the amplifier or your telephone.
How do I use the On Line Indicator (OLI)?
The OLI (15) visually notifies co-workers when you are on a call using a headset. Place the OLI in a visible location, such as your desk or wall. It can also be attached to the vertical struts of the Headset Stand (17). The OLI does not flash when using the telephone handset.
What should I do if I cannot hear a dial tone?
Press the Headset/Handset Selector Button (7) to switch to headset mode. Ensure all connections are correct and secure. Check that the headset is centered on your ear. Adjust the Configuration Dial (12) if necessary to improve sound quality.
What should I do if the lights are on but I can't hear anything?
Turn the Configuration Dial (12) clockwise through each of the four positions until you hear a dial tone. Ensure all cables are fully plugged in and in the correct ports. Press the purple mode button and listen for a musical beep. If no beep is heard, there may be an issue with the headset or adapter.
What should I do if I hear a dial tone but also a ringing noise?
Turn the Configuration Dial (12) clockwise to the next setting until the dial tone is clear. There are four settings available, so adjust until the noise is minimized and the dial tone is normal.