IKA A 11 basic (144 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum filling height for the mill?
The maximum filling height for the mill is up to the lower edge of the mill chamber. Exceeding this height can cause operational disturbances and overloading of the machine.
How do I safely open the mill chamber?
To safely open the mill chamber, first turn off the machine and unplug the power cord. Ensure the motor has completely stopped before proceeding. Always use personal protective equipment when handling sharp components.
What safety precautions should I take when using the mill?
Always ensure the machine is unplugged before opening or cleaning. Avoid placing any body parts between moving parts. Use personal protective equipment, especially when handling sharp blades or cold materials. Never operate the mill if it is not properly secured.
Can I use the mill with cooling agents like dry ice or liquid nitrogen?
Yes, the mill can be used with cooling agents such as dry ice (CO2) or liquid nitrogen (N2). However, follow all safety guidelines, including using appropriate personal protective equipment. Ensure the cooling agent is fully vaporized before starting the milling process.
What types of materials can be milled using the A 11 basic?
The A 11 basic is suitable for both impact milling and cutting milling. Impact milling is ideal for hard, brittle, or frozen materials like grains, coffee, or dried plant matter. Cutting milling is better for soft, fibrous, or cellulose-containing materials like paper, hay, or textiles.
How do I prepare the mill chamber for cooling with liquid nitrogen?
Fill the mill chamber with the sample, then add liquid nitrogen using a Dewar flask. Ensure the sample is fully submerged. Wait until the nitrogen has completely vaporized before starting the milling process. Use a funnel to prevent fine particles from being washed out during cooling.
What should I do if the mill chamber becomes frozen during cooling?
If the mill chamber becomes frozen, it may be difficult to unscrew. Allow it to thaw naturally or clean it in a dishwasher. Ensure the chamber is completely dry before using it again.
How do I start the milling process?
Once the mill chamber is properly filled and secured, turn on the power. Hold the mill housing with one hand and press the On/Off switch with your thumb. Apply gentle axial pressure to guide the milling tool into the material. Avoid sudden movements to prevent damage to the machine.
What is the recommended particle size for the material to be milled?
The material should be pre-crushed to a particle size of approximately 10 mm. This ensures efficient milling and reduces the risk of clogging. For wet or sticky materials, consider adding water to prevent adhesion to the chamber walls.
Can I use the mill for explosive materials?
No, the mill should not be used for materials with potential explosion risks, such as combustible dust. Always consult with IKA before milling any material with uncertain safety properties.