Knick Protos (92 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the PH 3400(X)-035 module?
To install the PH 3400(X)-035 module, first turn off the device's power supply. Open the device by removing the four screws on the front panel. Insert the module into the designated slot using the D-SUB connector. Secure the module with the provided screws. Ensure the shielding cap is properly attached over the terminals 2 and 8. Connect the sensor cables, making sure the shielding is fully below the cap to prevent interference. Close the device, tighten the front panel screws, and turn the power back on. Finally, perform the necessary parameter settings.
What are the available measurement functions for the PH 3400(X)-035 module?
The PH 3400(X)-035 module supports simultaneous measurement of pH, redox potential (ORP), and temperature. It is compatible with glass electrodes, ISFET sensors, or ISM sensors. The module can be used in hazardous areas classified for Group II, Equipment Category 2(1), Gas/Staub. Additional functions such as data logging and communication modules can be added to enhance functionality.
How to check the software version of the PH 3400(X)-035 module?
To check the software version, navigate to the device menu. Press the menu button to access the 'Menu Selection' screen. Select the 'Diagnosis' menu, then choose 'Device Description'. This will display the hardware and software versions, along with the serial number of the module. This information is useful for troubleshooting and ensuring compatibility with other system components.
What safety precautions should be taken when working with the PH 3400(X)-035 module?
The PH 3400(X)-035 module must not be opened for repairs. If maintenance is required, the module should be sent to the manufacturer. Always ensure the device is disconnected from power before installation or removal. Protect signal inputs from electrostatic discharge. Verify the compatibility of the system with other equipment before operation. In hazardous areas, use only a damp cloth for cleaning and ensure proper shielding to prevent interference.
How to connect the sensor cables to the PH 3400(X)-035 module?
To connect the sensor cables, ensure the shielding is fully below the shielding cap located over terminals 2 and 8. The shielding cap can be opened by lifting it. Connect the sensor cables to the appropriate terminals, making sure the shielding is properly grounded to avoid interference. After connecting the cables, secure the shielding cap back in place to protect the connections and ensure accurate measurements.
What are the different types of sensors supported by the PH 3400(X)-035 module?
The PH 3400(X)-035 module supports a variety of sensors, including glass electrodes for pH and redox measurements, ISFET sensors for pH and temperature, and ISM sensors for intelligent sensor management. These sensors can be used in both standard and hazardous environments, with additional safety features for explosive areas. The module is designed to work with a wide range of sensor types to provide accurate and reliable measurements.
How to access the device description menu on the PH 3400(X)-035?
To access the device description menu, press the menu button to enter the 'Menu Selection' screen. Navigate to the 'Diagnosis' menu and select 'Device Description'. This menu provides detailed information about the connected modules, including their hardware and software versions, serial numbers, and physical positions within the device. This information is essential for troubleshooting and system configuration.
What are the key components of the PH 3400(X) modular system?
The PH 3400(X) system consists of a base unit, measurement modules, and communication modules. The base unit includes the FRONT and BASE modules, which provide three slots for inserting measurement or communication modules. Additional features such as data logging, PID controllers, and communication protocols like Profibus PA or Foundation Fieldbus can be added. The system is designed for flexibility, allowing users to customize the setup based on their specific application requirements.
How to ensure proper shielding for the PH 3400(X)-035 module?
Proper shielding is crucial to prevent interference. The shielding cap over terminals 2 and 8 must be fully closed, with the shielding material positioned completely below the cap. This ensures that all signal lines are adequately protected from external electromagnetic interference. During installation, make sure the shielding is correctly connected and grounded to maintain measurement accuracy and system reliability.
What are the recommended practices for maintenance of the PH 3400(X)-035 module?
Regular maintenance of the PH 3400(X)-035 module includes checking the connections of the sensor cables, ensuring the shielding is properly in place, and verifying the integrity of the device's grounding. Avoid using any abrasive materials during cleaning, and use a damp cloth instead. If any issues are detected, refer to the device's diagnostic menu for troubleshooting. Always follow the manufacturer's guidelines for maintenance and repair to ensure optimal performance and safety.