SELFSAT SNIPE 2 (97 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the SNIPE2 antenna align with a satellite?
The SNIPE2 antenna automatically aligns with a preset satellite as long as it is within the satellite's coverage area. It uses GPS and internal sensors to determine the correct position and adjusts the antenna for optimal signal reception.
What is the maximum speed for vehicle use?
The SNIPE2 is designed for portable use and fixed installation on vehicles with a maximum speed of 130 km/h. It is programmed to automatically aim at geostationary television satellites while in motion.
What power sources are supported by the SNIPE2?
The SNIPE2 can be powered by a standard vehicle electrical system with 12 or 24 volts DC. For portable use, an optional power adaptor produced by the manufacturer must be used.
What happens if the satellite signal is blocked?
If the satellite signal beam is interrupted by obstacles such as mountains, buildings, or trees, the unit will not function and no TV signal will be received. Ensure a clear view to the sky for proper operation.
How do I select a satellite using the controller?
Use the arrow buttons on the controller to select the desired satellite and press OK. The unit will then search for the satellite, check its NID, and display 'SAT FOUND' once it is successfully locked.
How do I return the antenna to the HOME position?
After use, press the HOME button to return the antenna to its folded position. To fully turn off the unit, press and hold the POWER button for 5 seconds while in the HOME position.
What is the FINE TUNE mode used for?
The FINE TUNE mode allows users to manually adjust the antenna's position for improved signal strength. It can be used to fine-tune the AZ (Azimuth), EL (Elevation), and SK (LNB skew) settings for better reception.
What should I do if the unit shows an error message?
If an error message is displayed, check the LED indicators for details. Common errors include issues with the HOME position, tuner, movement, or communication. Refer to the manual for troubleshooting steps or contact a service center.
How do I enter TEST mode?
To enter TEST mode, press the MODE button once and then press OK. This allows access to various diagnostic functions displayed on the LCD screen. Press MODE again to exit and return to the previous status.
What happens if the vehicle moves faster than 25 km/h?
If the vehicle moves faster than 25 km/h while the unit is powered, the antenna will automatically fold back to the HOME position to prevent damage and ensure safe operation.
Related products from SELFSAT
H50D Serie
User manual 49 pages
H50D Serie
User manual 48 pages
H21D
User manual 49 pages
H21D
User manual 59 pages
H21D
User manual 135 pages
h21d2
User manual 135 pages
SNIPE DOME Air
User manual 47 pages
H22D Serie
User manual 48 pages
H50D2
User manual 49 pages
SNIPE 3
User manual 61 pages
TRAVELER KIT
User manual 61 pages
SNIPE DOME 2
User manual 64 pages
H22D+-Serie
User manual 66 pages
SNIPE BT Grey Line
User manual 68 pages
SNIPE
User manual 89 pages
CAMP 38
User manual 78 pages
CAMP38
User manual 78 pages
CAMP58
User manual 78 pages
SNIPE PLATINUM 2
User manual 82 pages
SNIPE PRO
User manual 133 pages