Polar W.I.N.D (91 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the Polar Sulky Mount and Training Computer?
Place the rubber part on the sulky bar and insert the sulky mount on top. Secure it with cable ties, adjust them around the sulky bar, and position the training computer on the mount. Turn it clockwise until it clicks to lock it in place.
How do I install the Polar Speed Sensor?
Attach the rubber part to the speed sensor, position it on the fork so the POLAR logo faces outward, and secure it with cable ties. Attach the magnet to a spoke at the same level as the sensor, ensuring it points toward the sensor. Adjust the gap to be under 4 mm/0.16''.
How do I fine-tune the speed sensor and magnet positioning?
Ensure the magnet passes close to the sensor but does not touch it. The gap should be under 4 mm/0.16''. You can fit a cable tie between the magnet and sensor for correct positioning. Rotate the front tire to test the sensor.
How do I teach the training computer to the speed sensor?
Go to Settings > Sulky > Sulky 1/2/3 > Speed. Select On/Off and On to activate the speed function. Press OK, then select YES to start teaching. Rotate the wheel a few times to activate the sensor. The flashing red light confirms activation.
What should I do if the speed reading is 0.0 while driving?
Press and hold the LIGHT button to search for the sensor. Ensure the sensor and magnet are correctly positioned. Check that the speed function is activated in the training computer. If the issue persists, the battery may be low or there may be electromagnetic interference.
What should I do if the speed sensor is not found?
Press OK to start the sensor search. Ensure no other speed sensors or training computers are nearby (40 m / 130 ft). If the issue persists, reposition the sensor and magnet, and ensure the gap is under 4 mm/0.16''.
What causes irregular speed or heart rate readings?
Electromagnetic interference or nearby wireless training computers can affect readings. Avoid areas near high voltage power lines, traffic lights, electric railways, WLAN base stations, car motors, or electric security gates. Ensure the sensor and magnet are correctly positioned.
What is the operating temperature range for the speed sensor?
The speed sensor operates within a temperature range of -10 ºC to +50 ºC (+14 ºF to +122 ºF). Ensure the sensor is not exposed to extreme temperatures or direct sunlight for prolonged periods.
How do I clean the speed sensor?
Clean the speed sensor with a mild soap and water solution, then rinse with clean water. Dry it carefully with a soft towel. Avoid using alcohol, abrasive materials, or immersing it in water to prevent damage.
What should I do if the battery in the speed sensor is empty?
Contact your authorized Polar Service Center for battery replacement. Polar recycles used sensors. Ensure the sensor is properly maintained and avoid exposing it to moisture or extreme temperatures to prolong battery life.