Intex EXCURSION 2 (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum capacity for the Challenger 3a model?
The maximum capacity for the Challenger 3a model is 3 persons or 320 kg (705 lbs). Ensure you do not exceed these limits for safety and compliance with regulations.
How should I inflate the boat chambers?
Adults should inflate the chambers in numerical sequence marked on the valves. Fill each chamber until it is stiff to the touch but not hard. Use the enclosed ruler to check the main chamber for proper inflation. Do not overinflate or use high-pressure compressors.
What is the recommended working pressure for each chamber?
The manufacturer recommends a working pressure of 0.035 bar (0.5 psi) for each chamber. Use the enclosed ruler to check the main chamber for proper inflation and ensure the boat sits level fore to aft.
What should I do if the boat loses pressure in cold weather?
In cold weather, the boat may lose some pressure due to air contraction. You may need to add a little air to the product. However, in hot weather, the air will expand, so you must release some air to prevent overpressure and potential failure.
How do I use the Boston valve for inflation?
To inflate, unscrew the double valve cap, insert the air pump into the valve, and fill the boat. Do not overinflate. To deflate, unscrew the quick-deflation cap, but ensure the boat is not in water when doing so.
What is the maximum motor power allowed for this boat?
The maximum motor power allowed for this boat is 1.5 HP. Ensure the motor does not exceed the recommended power and weight limits to maintain safety and compliance with regulations.
How do I install the seat cushions?
Inflate each seat cushion to about 75% of its capacity, attach the hinge to the boat, and slowly finish inflating until it is firm to the touch. Do not overinflate. For certain models, the cushions are tucked directly into the fore, mid, or aft locations of the cockpit.
The grab line provides a secure handhold for the user. Install it by following the instructions in the manual to ensure it is properly secured and accessible for safety during use.
How do I assemble the oars?
Insert Shaft A with the pin end into the blade, secure the pin, and pass it through the oar-lock with the blade facing outboard. Place the retainer ring on the other end, join Shaft A with Shaft B using the coupler, and tighten the covers securely. When not in use, secure the oars onto the oar holders.
What safety precautions should I follow when operating the boat?
Never operate the boat alone. Always wear a Personal Floatation Device (PFD). Do not exceed the maximum recommended capacities, and ensure the boat is properly inflated and balanced. Avoid using the boat in white water or extreme conditions.
Related products from Intex
SEAHAWK 3
User manual 84 pages
SEAHAWK 2
User manual 84 pages
SEAHAWK 4
User manual 84 pages
68318
User manual 84 pages
68324
User manual 84 pages
68376
User manual 84 pages
68346
User manual 84 pages
68349
User manual 84 pages
68369
User manual 84 pages
68325
User manual 84 pages
68350
User manual 84 pages
68373
User manual 84 pages
68371
User manual 84 pages
CHALLENGER 3a
User manual 84 pages
EXCURSION 3
User manual 84 pages
68319
User manual 84 pages