Axis 207MW (73 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the AXIS 207/207W/207MW camera?
To install the AXIS 207/207W/207MW camera, first check the package contents against the list provided. Familiarize yourself with the hardware components, then install the camera and connect all cables. Ensure the camera is positioned indoors and not exposed to direct sunlight. Follow the steps for mounting the camera on a wall or shelf, and connect the power and network cables as described in the installation guide.
What are the dimensions of the AXIS 207/207W/207MW camera?
The AXIS 207 has dimensions of 85 x 55 x 34mm (3.3" x 2.2" x 1.3") and weighs 177g (0.39 lb). The AXIS 207W and 207MW have dimensions of 85 x 55 x 40mm (3.3" x 2.2" x 1.6") and weigh 190g (0.42 lb). These measurements include the camera stand but exclude the power supply.
What power supply is required for the AXIS 207/207W/207MW?
The AXIS 207 uses a PS-L power supply, while the AXIS 207W and 207MW use a PS-H power supply. The power supply provides 4.9-5.1V DC with a maximum power consumption of 4.0W for the 207MW and 3.5W for the 207W. The power connector is a mini DC connector.
How do I set the IP address for the AXIS 207/207W/207MW?
To set the IP address, you can use the AXIS IP Utility for single cameras or the AXIS Camera Management software for multiple cameras. Ensure the computer running the utility is on the same network segment as the camera. Follow the steps to manually enter the IP address or use automatic discovery to find and assign an IP address.
What are the LED indicators on the AXIS 207/207W/207MW camera?
The camera has several LED indicators: the Wireless LED shows connection status for wireless networks, the Network LED indicates network activity, the Status LED shows camera operation, and the Power LED indicates power status. These LEDs can be configured in the camera settings to change behavior, such as flashing only when accessed.
How do I connect the camera to the network?
Connect the camera to the network using a shielded Ethernet cable. For wireless models, this connection is temporary and should be done via a wired network before switching to wireless. Ensure the cable is securely fastened and the camera is powered on. The network connector is an RJ-45 Ethernet port that supports Auto-MDIX for automatic cable detection.
What is the function of the I/O terminal connector on the AXIS 207/207W/207MW?
The I/O terminal connector allows connection to external devices such as relays, motion detectors, and alarm systems. It provides a 4-pin interface for digital input and transistor output. The transistor output can control external devices with a maximum load of 100mA and 24V DC, while the digital input can be activated by connecting to GND.
How do I mount the AXIS 207/207W/207MW camera on a wall or shelf?
For wall mounting, use the provided screws to attach the base plate to a flat surface, then adjust the camera angle and secure it with the lock ring. For shelf mounting, use the flexible clamp and attach it to the camera's lock ring, then adjust the angle and secure it. Ensure the camera is positioned indoors and not exposed to direct sunlight.
What is the recommended method for setting the IP address for multiple cameras?
For multiple cameras or large installations, use the AXIS Camera Management software. This tool can automatically discover and assign IP addresses, show connection status, and manage firmware upgrades. It supports configurations for different subnets and simplifies the process of assigning IP addresses to multiple devices.
What should I do if the camera's LED indicators are not working as expected?
If the LED indicators are not functioning correctly, check the camera's power supply and network connection. Ensure the camera is properly connected to the network and powered on. Some LEDs can be disabled in the camera settings under LED configuration. If issues persist, refer to the online help files for further troubleshooting guidance.
Related products from Axis
M43 Serie
User manual 30 pages
Q60 Series
User manual 110 pages
207 series
User manual 43 pages
207 series
User manual 64 pages
207 series
User manual 68 pages
207 series
User manual 73 pages
207 series
User manual 73 pages
Q6042-E
User manual 110 pages
Q6044-E
User manual 110 pages
Q6045-E Mk II
User manual 110 pages