Hanimex IC 4500 (82 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do you load batteries into the camera?
To load batteries, push open the battery cover and insert two AA size alkaline batteries with the correct + and - polarity as indicated inside the battery cover. Always replace batteries at the same time to ensure consistent performance.
How do you power on the camera?
Slide the lens cover switch fully open to turn on the power. Closing the lens cover switch cuts off all power and locks the shutter button. Ensure the OK indicator lights up before taking a picture.
How does the DX film speed setting work?
This camera uses the DX system for automatic film speed setting. For DX films below ISO 400, it sets the speed to ISO 100. For DX films at ISO 400 or higher, it sets to ISO 400. For non-DX films, it defaults to ISO 100.
How do you load film into the camera?
Slide the lens cover switch to open the lens cover. Open the back cover by sliding the latch down. Insert the film cartridge into the film chamber. Pull out a short length of film, ensuring it lies flat across the film plane. Depress the shutter button to engage the film and advance it until the frame counter shows '1'.
How does auto winding work?
After loading the film, depress and release the shutter button to rotate the take-up spool and engage the film. Check that the sprocket teeth align with the film perforations. Close the back cover and press the shutter button a few times to advance the film until the frame counter shows '1'.
How do you hold the camera for sharp pictures?
Hold the camera firmly with both hands, feet slightly apart. For horizontal shots, keep your left elbow close to your body. For vertical shots, keep your right elbow in. Avoid touching the lens, sensor, or flash with your fingers or hair. Press the shutter button slowly with the tip of your finger.
How does the built-in flash work?
The built-in flash automatically fires when light is insufficient. It has a shooting range of 0.9-3 meters (about 10 feet) for ISO 100 and 0.9-6 meters (about 20 feet) for ISO 400. Ensure the subject is within the proper range for the film being used.
How do you use the red-eye reduction feature?
To reduce red-eye, lightly press the shutter button to emit a red beam that makes the subject's pupils smaller, reducing the likelihood of red-eye. This feature is automatic and helps prevent the eyes from appearing red in color or white in black-and-white photos.
How do you use focus lock for subjects outside the auto focus frame?
To lock focus, center the auto focus frame on the subject, lightly press the shutter button to confirm the OK indicator lights up, then re-compose the shot without removing your finger from the button. Fully depress the shutter button to take the picture.
How do you unload film from the camera?
When the film is finished, the film advance will not restart. Push the rewind switch to the rewind position to start rewinding the film. The rewinding stops when the entire film is wound back into the cartridge. When you open the back cover, the rewind switch returns to its original position.