Skoda Construct (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to mark the drilling spot for the bracket lock?
Press your thumb on the central bracket panel at the centring template location to mark the spot for drilling a hole for the bracket lock. Then remove the centring template.
What is the diameter of the initial hole for the bracket lock?
Drill a hole with a diameter of 4.1 mm in the marked spot on the central bracket panel. Drill with extreme caution to avoid damaging the lock section of the bracket.
How to enlarge the hole for the bracket lock?
Lift the central bracket panel upwards and re-drill the existing hole to a diameter of 6.8 mm. Drill with extreme caution to avoid damaging the lock section of the bracket.
What is the final diameter of the hole for the bracket lock?
Enlarge the hole in the central bracket panel to a diameter of 35 mm. Be extremely careful not to damage the lock section of the bracket using the milling cutter.
How to ensure the hole is aligned with the bracket lock?
Visually check whether the drilled hole is opposite the bracket lock. Ensure the hole is correctly positioned before proceeding with further drilling or enlarging.
What safety precautions are required during drilling?
Drill with extreme caution to avoid damaging the lock section of the bracket. Use the appropriate drill bit and ensure the hole is aligned properly to prevent any risk of injury or vehicle damage.
What tools are needed for this task?
You will need a drill, a drill bit, a milling cutter, and a centring template. Ensure all tools are in good working condition and suitable for the task to avoid any risk of injury or damage to the vehicle.
What is the purpose of the centring template?
The centring template is used to mark the exact spot for drilling the hole for the bracket lock. It ensures accuracy and helps prevent damage to the lock section during the drilling process.
How to clean the area after drilling?
After drilling, clean off any formed burrs or debris from the hole and surrounding area. This helps prevent any potential damage to the lock section and ensures a clean, safe installation.
What should be done after completing the drilling?
Put the central bracket panel back into its correct position. Visually inspect the hole and ensure it is properly aligned with the bracket lock before proceeding with any further installation steps.
Related products from Skoda
3T9
User manual 60 pages
3T9
User manual 60 pages
ALU
User manual 48 pages
TRUNK GRILLE
User manual 60 pages
TRUNK GRILLE
User manual 68 pages
3V0 071 004
User manual 64 pages
CRUISE CONTROL
User manual 68 pages
FRONT BUMPER SPOILER
User manual 76 pages
5JJ 071 126
User manual 78 pages
5JJ 071 126
User manual 78 pages
6V6 092 155
User manual 88 pages