Whispbar K388W (81 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum weight capacity for the K388W fitting kit?
The K388W fitting kit has a maximum weight capacity of 75 kgs (165 lbs) for all listed vehicle models. This capacity is consistent across different regions and vehicle types.
How do I install the K388W fitting kit for the first time?
Start by removing all parts from the package and checking for completeness. If any parts are missing or damaged, contact your dealer. Use the keys to remove the covers, then reverse the adjusting screw 10 turns with a hex screwdriver. Press the adjusting screw and pull the crossbar legs out, ensuring each end is adjusted equally.
What tools are required for installation?
You will need a hex screwdriver, a spanner, and a set of self-tapping screws. The hex screwdriver is included with the crossbar and can assist in securing the assembly onto the leg. Ensure you use the correct size screws, such as M5 x 12 mm.
How do I secure the foot assembly to the leg?
Use a short capscrew and washer to secure the foot assembly to the leg. Press the foot down into the leg until it interlocks. Ensure the foot sits flush with the back edge of the vehicle roof rail. Do not over-tighten the screws.
What is the recommended spacing between crossbar legs?
The recommended minimum spacing between crossbar legs is 700mm (27 1/2") unless otherwise specified. This spacing ensures proper fitment and stability for the vehicle model you are installing the kit on.
How do I adjust the crossbar legs?
To adjust the crossbar legs, use the adjusting screw and reverse it 10 turns with a hex screwdriver. Press the adjusting screw and pull the legs out. Ensure both ends of the crossbar are adjusted equally for balanced support.
What should I do with loose parts after installation?
After detaching the foot from the leg, store all loose parts in a safe place to prevent loss or damage. Ensure the foot interlocks with the leg properly before securing it with the capscrew and washer.
How do I remove the plastic clamp block?
To remove the plastic clamp block, grip the bar leg with your fingers and push firmly with your thumbs until the clamp block drops out behind the leg. This allows for easier access to the leg for assembly.
What is the tightening torque for the adjusting screw?
Tighten the adjusting screw to 5 Nm (3.7 ft lb) by hand. Ensure it is secure but not over-tightened, as this could damage the components or affect the fitment of the crossbar.
How do I apply the protective strip?
Apply the protective strip as shown in the instructions, trimming it if necessary to fit the vehicle's roof rail. This helps prevent scratches or damage to the vehicle's surface during installation and use.
Related products from Whispbar
FLUSH BAR
User manual 48 pages
FLUSH BAR
User manual 49 pages
FLUSH BAR
User manual 53 pages
FLUSH BAR
User manual 48 pages
K328W
User manual 91 pages
K949
User manual 11 pages
PR3097
User manual 40 pages
Q6
User manual 47 pages
Q4
User manual 47 pages
Q5
User manual 47 pages
S23W
User manual 48 pages
S26W
User manual 48 pages
S11W
User manual 48 pages
S24W
User manual 48 pages
S24W
User manual 53 pages
S28W
User manual 48 pages
S27W
User manual 48 pages
S27W
User manual 53 pages
S37W
User manual 49 pages
S25W
User manual 53 pages