Whispbar K450W (82 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do you remove the plastic clamp block from the leg?
To remove the plastic clamp block, grip the bar leg with your fingers and push firmly with your thumbs until the clamp block drops out behind the leg.
What tools are needed to install the crossbar?
You will need a 3mm (1/8") Hex Key, a 10mm (3/8") spanner, and a hex screwdriver to complete the installation of the crossbar.
How do you secure the crossbar to the vehicle?
Place the crossbars over the mounting assembly on the tracks, tighten the plastic knob to the position shown when fully tightened, and ensure each end of the crossbar is adjusted equally.
What is the recommended distance between crossbars?
Set crossbars a minimum distance of 700mm (27 1/2") apart where no other distance is specified in the fitting instructions. This is especially important when carrying long loads.
How do you tighten the T-bolt to the track?
Place the T-bolt into the track, rotate it clockwise so it engages in the centre of the track, and use the 10mm (3/8") spanner to tighten the nut to 5Nm (3.7 ft lb).
What should you do after loading the crossbar?
Check that the crossbar is securely attached to the vehicle, use keys to fit and lock the covers, and recheck all fasteners immediately after a load is applied to the crossbars.
How do you adjust the crossbar legs?
Use a hex screwdriver to reverse the adjusting screw 10 turns, press the adjusting screw, and pull the crossbar legs out. Refer to the crossbar instructions for the adjustment method and ensure each end is adjusted equally.
What are the safety considerations when using the roof rack?
Avoid overloading the roof rack, ensure loads are evenly distributed with the lowest possible centre of gravity, secure long loads with non-elastic straps, and do not exceed the vehicle manufacturer's roof load rating.
What should you do if the unit feels loose?
Check that the unit is securely attached whenever you refit it to the vehicle. If the unit feels loose, refer to the fitting instructions and readjust accordingly.
How should you handle pointed objects when loading?
Objects with pointed ends, such as ski poles, should be carried with the pointed ends to the rear of the vehicle to prevent damage to the roof or other items.
Related products from Whispbar
FLUSH BAR
User manual 48 pages
FLUSH BAR
User manual 49 pages
FLUSH BAR
User manual 53 pages
FLUSH BAR
User manual 48 pages
K328W
User manual 91 pages
K949
User manual 11 pages
PR3097
User manual 40 pages
Q6
User manual 47 pages
Q4
User manual 47 pages
Q5
User manual 47 pages
S23W
User manual 48 pages
S26W
User manual 48 pages
S11W
User manual 48 pages
S24W
User manual 48 pages
S24W
User manual 53 pages
S28W
User manual 48 pages
S27W
User manual 48 pages
S27W
User manual 53 pages
S37W
User manual 49 pages
S25W
User manual 53 pages