Whispbar K661W (74 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum weight capacity for the K661W fitting kit?
The K661W fitting kit has a maximum weight capacity of 60 kgs (132 lbs) for the Honda Civic 5dr Hatch 12-+ models in NZ, AU, ZA, and EU.
What are the dimensions for the K661W fitting kit?
The K661W fitting kit has dimensions of 895mm (35 1/4") and 805mm (31 11/16") for the crossbar, with a width of 340mm (13 3/8") and a height of 240mm (9 7/16"), depending on the model.
How do I install the K661W fitting kit for the first time?
To install the K661W fitting kit for the first time, remove all parts from the package and check for completeness. Contact your dealer if any parts are missing or damaged. Follow the detailed installation steps provided in the manual for proper assembly.
How do I adjust the crossbar legs on the K661W fitting kit?
To adjust the crossbar legs, use a hex screwdriver to reverse the adjusting screw 10 turns. Press the adjusting screw and pull the crossbar legs out. Ensure each end of the crossbar is adjusted equally for balanced positioning.
How do I secure the clamps on the K661W fitting kit?
To secure the clamps, remove the locking screw and apply the protective strip as shown. Refit the locking screw through the hole in the clamp, but do not tighten it yet. Ensure the clamps are in the correct position on the vehicle.
What are the part numbers for the clamps on the K661W fitting kit?
The clamps on the K661W fitting kit have the following part numbers: A = A073, B = A074, and C = A075. These correspond to the letters stamped on the clamps, which indicate their correct positions on the vehicle.
How do I attach the clamps to the legs of the K661W fitting kit?
Attach the clamps to each leg of the K661W fitting kit. Note that clamps may have labels indicating their positions on the vehicle, such as 'Front Right'. Ensure the clamps are aligned correctly before securing them.
What are the part numbers for the rubber pads on the K661W fitting kit?
The rubber pads on the K661W fitting kit have the following part numbers: A = 11-04-252 and B = 11-04-253. These pads should be placed on the vehicle roof, and they may vary in shape from the one shown.
How do I position the rubber pads on the K661W fitting kit?
Place the rubber pads supplied with the K661W fitting kit on the vehicle roof. Ensure the pads fit into the holes underneath the foot for proper support and alignment.
What is the recommended spacing between crossbars on the K661W fitting kit?
The recommended minimum spacing between crossbars on the K661W fitting kit is 700mm (27 1/2") unless otherwise specified. Adjust the legs so they are equally positioned from the ends of the crossbar and engage firmly with the vehicle body.
Related products from Whispbar
FLUSH BAR
User manual 48 pages
FLUSH BAR
User manual 49 pages
FLUSH BAR
User manual 53 pages
FLUSH BAR
User manual 48 pages
K328W
User manual 91 pages
K949
User manual 11 pages
PR3097
User manual 40 pages
Q6
User manual 47 pages
Q4
User manual 47 pages
Q5
User manual 47 pages
S23W
User manual 48 pages
S26W
User manual 48 pages
S11W
User manual 48 pages
S24W
User manual 48 pages
S24W
User manual 53 pages
S28W
User manual 48 pages
S27W
User manual 48 pages
S27W
User manual 53 pages
S37W
User manual 49 pages
S25W
User manual 53 pages