Nice ETPB (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the ETPB transponder reader used for?
The ETPB transponder reader is used to control automations for doors, gates, garage doors, sectional doors, and similar equipment. It allows authorized persons with valid cards to access specific locations and services.
What technology does the ETPB use?
The ETPB uses the 'BlueBus' technology to communicate with the control unit and other devices. This system uses parallel connections without polarity, and supports up to four devices including ETPB, EDSB, and EDSIB.
How many cards can the ETPB memory store?
The installed memory card (mod. BM1000) can store up to 255 cards. Card-command combinations are memorized during programming operations, and the memory can also be programmed directly in a Nice programming unit (O-BOX or MOU).
What are the installation warnings for the ETPB?
ETPB must be secured to a vertical wall and installed in a location protected from accidental impact. It should be installed at a height of 1.5 m from the ground for easy card reading. It must be placed on a solid surface and kept away from heat and naked flames.
How do you assign different commands to the ETPB?
The ETPB can send two different commands to the control unit: command no. 1 and command no. 2. These commands can be assigned to different manoeuvre actions, such as 'Step-by-Step' or 'Partial Open'. The assignment can be changed using procedures in the manual.
What are the programming modes for the ETPB?
The ETPB supports two programming modes: 'Easy' and 'Professional'. 'Easy' mode is for basic card memorization and deletion, while 'Professional' mode offers more advanced functions like managing multiple cards, setting usage limits, and blocking/unblocking automation.
How do you program a card in 'Easy' mode?
In 'Easy' mode, a card can be programmed for command no. 1, command no. 2, or both. To program a card, pass it in front of the reader once, twice, or three times, depending on the command. The procedure can be repeated within 10 seconds for additional cards.
How do you program a card in 'Professional' mode?
In 'Professional' mode, you can program cards for specific commands using 'MASTER' cards. 'MASTER-1' and 'MASTER-2' are used to store command no. 1 and no. 2 respectively, while the 'SINGLE MASTER' card can store both commands. Additional functions like erasing, counting, and limiting card usage are also available.
What are the acoustic signals from the ETPB during programming?
The ETPB emits acoustic signals to indicate the status of programming. One signal means a valid card was passed, two consecutive signals plus one means an invalid card was passed, three signals indicate successful programming, and five signals indicate an error during programming.
How do you erase all data from the ETPB memory?
To erase all data from the ETPB memory, pass any 'MASTER' card in front of the reader five times. After the reader emits three acoustic signals, hold the same card in front of the reader again. Wait for five acoustic signals, then remove the card. This will clear the memory and require reprogramming.