Telcoma PASSO (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the digital selector?
Install the command unit in an accessible location. Remove the keyboard cover with a screwdriver, secure the base with at least two screws, and connect the electrical wiring. Ensure the communication wires (terminals 3 and 4) are twisted together for the entire length to the receiver. Repeat the process for the receiver, ensuring communication wires (terminals 5 and 6) are twisted together. Verify the voltage selection before powering the units and test communication by pressing the initialization button P2.
What is the maximum distance for the communication line?
The maximum distance for the communication line is not specified in the manual, but it is recommended to keep the line as short as possible to ensure reliable signal transmission. The communication wires should be twisted together for the entire length to minimize interference.
What are the technical specifications of the PASSO selector?
The PASSO selector operates on 12/24 Vdc/ac. It consumes 60 mA at 24 Vac and can handle a maximum relay current of 1 A. The maximum relay voltage is 24 Vac. The communication speed is 38,400 baud, and it can store up to 750 codes. The operating temperature range is -10°C to +70°C, and the device has an IP53 protection rating.
How many keypads can be connected to the receiver?
The receiver can support a maximum of 4 keypads. Each keypad is connected via a two-wire communication line, and the communication wires must be twisted together for the entire length to ensure reliable signal transmission.
What are the relay output types available?
The relay outputs can be of three types: impulse (activates the relay for one second), step/step (continuous activation), and timed (programmable from 2 to 255 seconds). These outputs are clean contacts and can be used for various control applications.
How do I verify communication between the keypad and receiver?
To verify communication, press the initialization button P2 on the receiver. The red LED on the keypad should light up, and the buzzer should emit a beep, indicating successful communication between the two units.
What is the purpose of the red LED on the keypad?
The red LED on the keypad indicates the status of the device. It lights up when communication is established with the receiver and may also signal specific operations or errors through different patterns or colors.
What does the buzzer sound indicate during operation?
The buzzer provides audio feedback during various operations. A single beep indicates a key press, a different tone indicates a successful operation, two beeps signal the end of a programming session, four beeps indicate an error, and ten beeps signal a fault or loss of communication.
What is the master code used for?
The master code is used by the installer to access the programming settings of the system. The default code is 12345678, and it is recommended to change it as the first step in the programming process to enhance security.
What is the user code used for?
The user code is the code that the end-user will use to operate the system. During programming, the length of the user code can be set between 1 and 8 digits, allowing for flexibility in access control and security settings.