Kress 1400 HKS (184 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting depth for the 1400 HKS model?
The maximum cutting depth for the 1400 HKS model is 66 mm at a 90° angle. This allows for precise and efficient cutting of various materials such as wood, plastic, and composite materials.
How do you adjust the cutting depth on the saw?
To adjust the cutting depth, loosen the clamp lever on the housing to lower the saw table. The cutting depth can be set using the markings on the scale. Ensure the cutting depth matches the thickness of the material being cut.
What is the maximum cutting depth for the 1400 DS model?
The maximum cutting depth for the 1400 DS model is 200 mm at a 90° angle. This provides greater versatility for cutting thicker materials.
What safety precautions should be taken when using the saw?
Always ensure the saw is properly grounded and use a suitable extension cord if needed. Wear appropriate personal protective equipment, including hearing protection and safety goggles. Never operate the saw without the blade and slot wedge properly installed. Always check for damaged cords or components before use.
What is the noise level of the saw?
The noise level of the saw is typically around 92 dB(A) for the sound pressure level and 103 dB(A) for the sound power level. It is important to use hearing protection when operating the saw.
What is the vibration level of the saw?
The saw has a triaxial vibration emission value of up to 4.8 m/s² when cutting wood. This value is measured according to EN 60745 standards and may vary depending on the material being cut.
How do you install the blade on the saw?
To install the blade, first loosen the clamp lever to position the saw table at the desired depth. Remove the blade guard and install the blade in the spindle, ensuring the blade's arrow aligns with the housing's arrow. Secure the blade using the hex key and tighten the set screw.
What is the purpose of the slot wedge?
The slot wedge serves as a safety feature to prevent kickback. It must be properly installed to ensure safe operation. The wedge is positioned between the blade and the saw table to absorb and redirect any sudden forces.
What is the recommended blade type for cutting wood?
The recommended blade type for cutting wood depends on the type of wood and the cut required. For general use, a blade with a tooth width of 2.6 mm is suitable. For cutting hardwoods or plastics, a blade with a finer tooth configuration is recommended.
How do you change the blade on the saw?
To change the blade, first turn off the saw and unplug it. Loosen the clamp lever to adjust the saw table to the minimum cutting depth. Remove the old blade and install the new one, ensuring the blade's arrow aligns with the housing's arrow. Secure the blade using the hex key and tighten the set screw.