Bort 93727222 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What causes kickback in a circular saw?
Kickback occurs when the saw blade becomes pinched, bound, or misaligned, causing the blade to lift out of the workpiece and move toward the operator. This can happen if the blade is tightly bound by the kerf closing, the blade becomes twisted, or the teeth dig into the wood surface, leading to uncontrolled movement.
How can kickback be prevented?
To prevent kickback, maintain a firm grip with both hands, position your body to the side of the blade, avoid cutting nails or screws, support large panels to prevent blade pinching, use sharp and undamaged blades, and ensure blade depth and bevel adjustments are secure before cutting.
What should I do if the blade is binding?
If the blade is binding, release the trigger and hold the saw motionless in the material until the blade stops completely. Never attempt to remove the saw from the workpiece or pull it back while the blade is in motion, as this can cause kickback. Investigate and correct the cause of binding.
What safety precautions should I take when using the saw?
Keep hands away from the blade and cutting area, avoid reaching under the workpiece, adjust the cutting depth to the thickness of the material, support the workpiece properly, and use a rip fence or straight edge guide. Always check the blade is not damaged and the guard is functioning correctly.
What should I do if the blade is damaged?
Never use a dull or damaged blade, as it can cause excessive friction, blade binding, and kickback. Replace the blade with a sharp, undamaged blade that is compatible with the saw's arbor holes to ensure safe and efficient operation.
How should I handle the lower guard?
Ensure the lower guard closes properly before each use. Do not clamp or tie it in the open position. If the saw is dropped, check the guard for damage and ensure it moves freely without touching the blade. The guard should operate automatically for most cuts, except for plunge or compound cuts.
What should I do if the saw becomes jammed?
Immediately switch off the tool and disconnect the plug if the saw becomes jammed or experiences electrical or mechanical malfunction. Do not attempt to force the blade free; instead, investigate and address the cause of the jam.
What are the technical specifications of the saw?
The saw is designed for lengthwise and crosswise cutting of wood, with angle cuts up to 45°, and can also cut non-ferrous metals, light building materials, and plastics with the appropriate blades. It includes a riving knife, lower guard, blade bolt, and adjustable depth and bevel settings.
How should I maintain the saw?
Regularly clean the machine housing with a soft cloth, keeping ventilation slots free from dust. Avoid using solvents like petrol or alcohol, which can damage plastic parts. The machine requires no additional lubrication. Contact your local SBM Group dealer for maintenance or repairs.
What should I do if the tool is not working properly?
If the tool is not functioning correctly, stop using it immediately and contact your local SBM Group dealer. Faults such as worn parts or incorrect blade use can lead to safety hazards and should be addressed by a qualified technician.