Probuilder 32861 (69 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety gear is required before using the tool?
Always use ear protection, eye protection, and a dust mask. Wear protective gloves and ensure that all safety equipment is in place before operating the tool.
What is the voltage and frequency of the tool?
The tool operates on a voltage of 230-240 V with a frequency of 50 Hz.
What is the maximum cutting depth?
The maximum cutting depth at 90° is 62 mm, and at 45° it is 46 mm.
What are the noise levels of the tool?
The sound power level is 109.6 dB(A), and the sound pressure level is 98.6 dB(A). These levels are measured with a 3 dB(A) correction.
What are the vibration levels of the tool?
The vibration levels are 4.612 m/s² at the handle and 4.756 m/s² at the support grip, with a K value of 1.5 m/s².
What safety precautions should be taken when using the tool?
Never place your hand or fingers on the workpiece in front, behind, or under the tool while it is running. Ensure the guard is closed automatically when the tool is not in use and never lock it in the open position. Avoid pressing the tool against the workpiece or applying pressure to the sides of the blade.
How do you adjust the cutting depth?
To adjust the cutting depth, loosen the depth adjustment lever, move the tool to the desired depth relative to the blade, and then tighten the lever again. The depth can be measured using the depth gauge provided.
How do you set the angle of the blade?
To set the blade angle, loosen the angle adjustment lever, tilt the tool to the desired angle (0-45° from vertical), and then tighten the lever again. The angle can be checked using the angle indicator.
What should you do if the blade gets stuck?
Immediately release the on/off switch if the blade binds or becomes stuck. If the blade is stuck, the tool may be thrown back at you with great force, so it is important to stop the tool immediately and ensure the guard is fully closed before attempting to remove the blade.
What should you do with the old blade after replacement?
Dispose of the old blade properly according to local regulations. Do not throw it away with household waste, as it contains materials that may be harmful to the environment and human health.