Skil 1350 (136 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum size of tile that can be cut?
The maximum workpiece dimensions for tiles are 380 x 380 x 12 mm. This tool is designed for wet cutting of ceramic, porcelain, and concrete tiles.
What safety precautions should be taken when using the tile saw?
Always wear eye protection, gloves, and a dust mask. Keep children and bystanders away from the work area. Avoid using the tool in explosive atmospheres and ensure the tool is disconnected from power before making adjustments.
How do you install a new blade?
Disconnect the power, remove the lower guard, hold the blade firmly, loosen the blade nut counterclockwise, remove the flange and blade, install the new blade with the arrow in the correct direction, and tighten the blade nut clockwise.
What should you do if the power cord is damaged?
Do not use the tool if the cord is damaged. Immediately disconnect the plug and replace the cord with a specially prepared one available through the service organization.
How do you test the residual current device (PRCD)?
Plug the PRCD into the mains socket, press the RESET button, then press the TEST button. If the PRCD fails the test, do not use the tool.
How do you set the mitre angles?
Slide the mitre gauge on the rip fence, loosen the lock knob, rotate the gauge to the desired angle, and tighten the lock knob. Ensure the mitre gauge is locked and make trial cuts if extreme accuracy is needed.
What should you do after completing a cut?
Turn off the tool, wait until the blade has completely stopped, and then remove any part of the workpiece. Never place your hands in the path of the saw blade.
How do you ensure the rip fence is parallel to the blade?
Before starting, check that the rip fence is parallel to the blade. Adjust the rip fence to the desired distance using the scale and ensure it is locked in place.
What is the recommended way to store the tile saw?
Store the tool indoors in a dry, locked-up place, out of reach of children. Ensure the tool is disconnected from power and the water reservoir is emptied.
What should you do if the tool overheats during use?
Allow the tool to cool down for at least 10 minutes before continuing use. Avoid continuous operation without breaks to prevent overheating.