Renkforce 1582598 (124 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How many user codes can be stored for output #1?
The code lock can store up to 100 user codes for output #1, while outputs #2 and #3 can each store up to 10 user codes. This allows for flexible access control based on different user roles or scenarios.
What is the purpose of the DAP bridge?
The DAP bridge (Direct Access to Programming) allows activation of the programming mode without the master code. This is useful if the master code is forgotten, enabling reprogramming of the device securely.
What is the function of the K OR A bridge?
The K OR A bridge allows switching between two functions: 'K' activates output 12 for 10 seconds when a button is pressed, while 'A' activates output 12 when the door is forced open, triggering a door sensor.
What is the maximum current rating for the tamper contact?
The tamper contact has a current rating of 24 V/DC and 50 mA. It is a normally closed (NC) contact that can be connected to an alarm system to detect tampering attempts on the code lock.
How do you activate the door bell output?
The door bell output is activated when the 'BELL' button is pressed. It uses a potential-free NO (normally open) relay contact with a current rating of 24 V/DC and 1 A, suitable for connecting to a doorbell system.
What is the power supply requirement for the device?
The device requires a 12 V DC power supply. Connect the positive terminal to screw terminal 5 and the negative terminal to screw terminal 6, ensuring correct polarity to avoid damage.
What safety precautions should be taken when installing the device?
Avoid exposing the device to water or moisture, as it can cause damage. Ensure proper installation in accordance with IP54 ratings for both indoor and outdoor use. Do not modify or tamper with the device, as this may void the warranty and pose safety risks.
What should be done if the device is damaged or not functioning properly?
If the device shows visible damage, does not function correctly, or has been stored under unfavorable conditions for an extended period, it should be taken out of service. Do not use it until it has been inspected and repaired by a qualified technician.
What are the functions of the LED indicators?
The LED indicators provide visual feedback on the device's status: 'MAINS' indicates power supply, 'DOOR' shows door-related activity, 'ALARM' signals an alarm condition, and 'AUX' indicates auxiliary functions or status changes.
Can the device be used with an alarm system?
Yes, the device can be integrated with an alarm system. It includes a tamper contact that can trigger an alarm in case of unauthorized access or tampering, and it supports various output configurations for联动 with security systems.