Phocos CX10 (117 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect the regulator to the battery?
Connect the battery cables to the regulator with the correct polarity. Work on the system without voltage by first connecting the cables to the regulator, then to the battery. Ensure the cable cross-section meets the minimum requirements: CXIO: 2.5 mm², CX20: 4 mm², CX40: 10 mm². Avoid reverse polarity connections, as they will be signaled acoustically.
How do I connect the regulator to the solar generator?
Connect the solar generator cables to the regulator with the correct polarity. Work on the system without voltage by first connecting the cables to the regulator, then to the solar generator. Ensure the cable cross-section meets the minimum requirements: CXIO: 2.5 mm², CX20: 4 mm², CX40: 10 mm². Keep the positive and negative cables close together to minimize electromagnetic effects.
What safety precautions should I take when installing the regulator?
Install the regulator in a dry, sheltered area to protect it from weather influences. Ensure it is mounted on a non-flammable surface and maintain sufficient distance from the floor or ceiling for proper ventilation. Avoid installing it in wet areas. Always connect the regulator in the specified order to prevent connection errors.
How do I connect the load output?
Connect the load cables to the regulator with the correct polarity. Work on the system without voltage by first connecting the cables to the regulator, then to the load. Ensure the cable cross-section meets the minimum requirements: CXIO: 2.5 mm², CX20: 4 mm², CX40: 10 mm². Use a diode (e.g., IN5401) in the reverse direction between the load and the regulator to protect against inductive spikes.
How do I use the surplus output?
To use the surplus output, first disconnect the green connector from the regulator. Connect the surplus control cable to the surplus input as shown. Ensure the cable is connected with the correct polarity. Connect the surplus cable to the appropriate consumer (e.g., Phocos 3CM and DCL). Reconnect the green connector to the regulator after the connection is complete.
What is the purpose of the regulator?
The regulator protects the battery from overcharging by the solar generator and from deep discharging by the consumers. It uses a multi-stage charging characteristic that is temperature-compensated to achieve optimal battery charging. The regulator automatically adjusts to 12V or 24V operation based on the battery voltage.
How do I program the regulator for night lighting?
The regulator can be programmed for night lighting applications. It has an output that can be used with specific consumers like the Phocos 3CM and DCL to allow the use of surplus energy from the solar system. A connection interface is also available for use with a CX-I interface adapter.
What are the protection features of the regulator?
The regulator includes a range of protection and display functions. It features a temperature-compensated charging system, a low-voltage disconnect function, and a full electronic protection system. It also includes a fuse that must match the nominal current of the regulator: CXIO: 15A, CX20: 30A, CX40: 50A.
Can I mount the regulator on a DIN rail?
Yes, the regulator can be mounted on a 35 mm DIN rail using an optional mounting plate (CX DR2). Use the provided mounting screws to secure the regulator to the rail. Ensure the mounting is stable and allows for proper ventilation.
What should I do if the battery is reverse connected?
If the battery is reverse connected, the regulator will output a reversed voltage at the load terminals. Do not connect any consumers in this state, as it can cause damage. Always check the polarity before connecting the battery to the regulator.