STEINEL 085643 (75 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the Area-/Linecoupler ALC100 KNX-S?
The Area-/Linecoupler ALC100 KNX-S connects two KNX lines into a logical functional area and ensures galvanic isolation between them. This allows each KNX line in an installation to operate electrically independently of the others.
How is the device used as a segment coupler?
As a segment coupler, the device connects a subordinate line segment with the main line segment, optionally with or without group communication filtering. It is logically assigned to the subordinate line segment, allowing the first segment of a line to be extended by additional parallel line segments.
What are the technical specifications of the device?
The device operates within an ambient temperature range of -5 to +45 °C and a storage/transport temperature range of -25 to +70 °C. It has a protection class III, weighs 90 g, and has an installation width of 18 mm. It supports KNX medium TP256 and operates in S-Mode with a nominal voltage of DC 21 to 32 V SELV.
How do the status LEDs indicate device status?
The RUN LED indicates the status of communication on the main and subordinate lines, with different colors and blinking patterns signaling various operational states such as power supply, communication errors, or filter functions. The MAIN and SUB LEDs show similar status indicators for their respective lines.
What is the Safe-State-Mode and how to activate it?
Safe-State-Mode stops the execution of the loaded application program and only allows system software to run. To activate it, turn off the bus voltage or disconnect the main line KNX terminal, press and hold the PROG button for about 15 seconds, then reconnect the power or terminal. The mode is active when the PROG LED blinks slowly.
How to perform a Master-Reset on the device?
To perform a Master-Reset, ensure Safe-State-Mode is active, press and hold the PROG button for more than 5 seconds. The PROG LED will blink quickly, and after releasing the button, the device will reset, restart, and be operational again after about 5 seconds.
Can the device be used as a Secure Proxy?
Yes, the device can act as a Secure Proxy for KNX Data Secure, allowing communication between devices that use KNX Data Secure and those that do not. It must be installed in separate lines or segments and configured in the ETS project for secure communication.
How to program the physical address and application program?
Use the ETS to program the physical address and application program. Turn on the bus voltage, press the PROG button until the programming LED lights up, then program the address and application. The LED will turn off once the address is set.
What is the function of the PROG button?
The PROG button is used to enter programming mode, activate Safe-State-Mode, and perform a Master-Reset. It also allows the device to be reprogrammed or reset to factory settings using the STEINEL KNX Service App.
What is the role of the KNX Data Secure feature?
KNX Data Secure provides protection against manipulation in building automation systems. It can be configured in the ETS project, and all devices should use it for maximum security. If some devices cannot communicate securely, a Secure Proxy can be used to connect them.