CAME ZC5 (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power supply for the motor?
The motor operates on a single-phase AC voltage of 230V, with a maximum power rating of 500W.
How to connect the antenna cable?
Connect the RG58 antenna cable to the designated terminals. Ensure the radiofrequency card is locked into place after disconnecting the power supply or removing batteries.
What does the 'PROG' button do?
The PROG button on the electronic board is used for memorizing transmitters. Hold it pressed while programming, and the LED will flash to indicate readiness.
How to activate remote control function?
To enable radio frequency operation, connect the antenna cable properly and insert the RF card into the electronics board after turning off power or removing batteries.
What is the purpose of the limit switches F-FA and F-FC?
The F-FA switch detects opening limits (normally closed contact), while F-FC detects closure limits (also normally closed). These help control door movement safely.
How to adjust motor torque settings?
Use the faston connector with a black wire to select one of four positions: 1=min, 4=max. This adjusts the motor's resistance during operation for safety and performance.
What is the function of the 'dead man' mode?
The dead man mode activates when the TL trimmer is set to its minimum value. It ensures automatic closure if no movement signal is detected, enhancing security.
How to reset or stop the system manually?
Use the stop button (1-2) which has a normally closed contact. Pressing it interrupts power flow and stops all motor operations immediately.
What are the electrical connections for accessories?
The 24V AC accessory terminals are connected via pins 10-11, with a maximum load of 20W. Ensure proper insulation to prevent short circuits or damage.
How should electronic components be disposed of?
Electronic parts may contain harmful substances and must not be discarded improperly. Return them to authorized recycling centers for safe disposal according to local regulations.
Related products from CAME
KIARO 24 IN
User manual 2 pages
KIARO IN
User manual 2 pages
RE432
User manual 2 pages
V0670
User manual 2 pages
S4340C
User manual 2 pages
A4617
User manual 2 pages
FA001
User manual 2 pages
YE0005
User manual 2 pages
YE0005
User manual 2 pages
LB18
User manual 4 pages
LM22
User manual 4 pages
ZL160
User manual 16 pages
ZL150
User manual 20 pages
001DC002AC
User manual 4 pages
001DC007AC
User manual 4 pages
ZL15
User manual 8 pages
ZBX6
User manual 20 pages
S0004N
User manual 8 pages
ZL21
User manual 8 pages
ZL41
User manual 8 pages