VHF S2 (230 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when operating the machine?
Always follow the safety messages provided in the manual. Ensure the machine is properly set up, use appropriate personal protective equipment, and avoid operating the machine in unauthorized modes. Keep children and animals away from the machine and never leave it unattended unless it meets all safety requirements.
What should be done if there is a power failure?
After a power failure, follow the procedure outlined in the manual to safely restart the machine. Ensure all safety interlocks are activated, check for any damage, and confirm that the machine is in a safe operating condition before resuming use.
How should compressed air be connected to the machine?
Connect the compressed air according to the instructions in the manual. Ensure the service unit is properly connected and the air pressure is set to the recommended level. Always check for leaks and ensure the system is secure before operating the machine.
What are the safety classifications for warning messages?
The manual uses four classifications for safety messages: DANGER (for situations that can cause death or serious injury), WARNING (for situations that could result in death or injury), CAUTION (for situations that may cause minor or moderate injury), and NOTICE (for practices that may lead to material damage).
What materials can the machine process?
The machine is designed to process materials such as wax, most plastics (e.g., PMMA), composites, zirconium oxide, and non-precious alloys (CoCr-based). It is not intended for use with other materials, as this may damage the machine and compromise safety.
What should be done if the machine is used in service mode?
Service mode should only be used by authorized personnel trained by vhf. Ensure the working chamber door is closed, the safety interlock is active, and no one is within reach of the machine. Avoid reaching into the working chamber while the axes are moving or during machining.
How should the machine be cleaned?
Regular internal and external cleaning is required to maintain the machine's performance and safety. Clean the collet chuck, housing, and other components as specified. Use appropriate cleaning tools and ensure the machine is powered off before cleaning.
What are the requirements for unattended operation?
The machine can operate unattended if national and local laws are followed, and the requirements of the insurance company are met. Ensure the working chamber is clean, unauthorized access is prevented, and the machine is set up for either dry processing or wet grinding, not both. A fire detection system must also be installed in the room where the machine is located.
What should be done if there is a damaged cable?
If a cable is damaged, immediately disconnect the machine from any electrical source and prevent it from being restarted. Contact the service department and replace the cable only with original spare parts to ensure safety and compliance with the manufacturer's standards.
What are the requirements for using the wet grinding module?
Wet grinding can only be performed using the wet grinding module from vhf. Ensure the module is properly installed and functioning. If the machine is modified or the housing is removed without written consent from the service department, the warranty will expire.