IPC Premium (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to start the high-pressure washer?
To start the high-pressure washer, turn the selector switch 'A' to position 'I'. In this mode, you can adjust the water temperature using regulator 'B' from minimum to maximum.
What is the purpose of the detergent solution selector?
The detergent solution selector allows you to activate the supply of the cleaning solution. Place switch 'A' in position II ('Chem') to start the delivery of the detergent.
How do I check for temperature readiness?
Temperature readiness is indicated by light H turning on, which signals that the preset operating temperature has been reached. If it does not reach within 4 minutes, adjust the flow slightly to allow attainment of the desired temperature.
What do the indicator lights mean?
Indicator light C shows power status; D indicates active heating system; E signals faults or anomalies; F and G show low levels for descaler and detergent solution, respectively. Light H confirms that the operating temperature is achieved.
How do I access submenus on the control panel?
Pressing key 'OK' for more than 2 seconds displays three submenus. Use keys '+' and '-' to navigate through them. These include language selection, detergent quantity settings, and software version check.
What should I do if there is no water flow?
If the high-pressure washer stops due to a lack of water, it may be caused by clogged filters or faulty connections. Check these components and ensure that all valves are open for proper operation.
How can I reset fault indicators?
To clear any displayed faults, turn the main switch 'A' to position 0 first, then back to position I. This resets most error signals but should not be used as a substitute for professional service if issues persist.
What does it mean when light E is flashing?
Light E flashing indicates an anomaly or fault detected by the system. Common causes include micro-leaks, clogged nozzles, low water levels, or overheating. Refer to the display for specific messages and address accordingly.
How do I check working hours on the device?
To view working hours using hot or cold water, place switch 'A' in position I and press key '+' multiple times. The first press shows lance openings, second shows hot water hours, third shows cold water hours.
What should I do if the high-pressure washer stops after 20 minutes of non-use?
If the device is unused for over 20 minutes and enters total stop mode (TSI), it will display flashing light E. To restart, turn switch 'A' to position 0 then back to position I.