Goetze 9040 (92 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the technical specifications of the pressure reducer 9000 / 9040?
The pressure reducer 9000 / 9040 is available in sizes DN 15 to 50. It features a threaded connection according to DIN EN 10226-1, with options like ½", ¾", 1", 1 1/4", 1 ½", and 2". The installation length varies depending on whether the nozzle is included. The maximum weight ranges from 1.0 kg to 4.6 kg. It is suitable for potable water and other media upon request.
What materials are used in the pressure reducer 9000 / 9040?
The housing is made of lead-free bronze or stainless steel. The valve seat is made of plastic, the sieve is made of stainless steel and plastic, and the elastomeric parts are made of EPDM. The filter sieve cup is made of plastic. Ensure compliance with local disposal regulations.
How do I install the pressure reducer 9000 / 9040?
Install the pressure reducer in a pressure-free section of the piping system. Ensure the correct gaskets are used and only suitable tools are applied. Maintain a 5 x DN calming section and install shut-off valves on both sides. The flow direction must match the housing arrow, and the installation position is flexible.
How do I adjust the pressure reducer 9000 / 9040?
Adjust the pressure by turning the adjustment knob when the system is at zero flow. There are two methods: using the adjustment scale or a manometer. For the scale method, loosen the fixing screw and turn the knob clockwise to increase pressure or counterclockwise to reduce it. For the manometer method, ensure the system is pressurized and adjust accordingly.
What is the maintenance schedule for the pressure reducer 9000 / 9040?
According to DIN EN 806-5, annual inspection and maintenance are required to address potential malfunctions caused by contamination, corrosion, scaling, and natural wear. The interval may be shortened depending on operating conditions. Clean the sieve, inspect the valve seat, and check the back pressure at zero and peak flow.
What should I do if the back pressure is higher than the set value?
The valve seat may be dirty or damaged. Clean or replace the valve seat. In some cases, a check valve between the pressure reducer and the hot water heater may be faulty, causing pressure buildup. Replace the check valve if necessary.
What should I do if the pressure reading on the scale and manometer do not match?
If the scale ring is removed from the adjustment knob, the exact positioning of both parts is lost. Reinstall the scale ring and align it with the current pressure. Ensure the scale ring is properly positioned and secured.
What should I do if water is leaking from the spring cap?
Water leakage from the spring cap may indicate improper installation or a damaged membrane. Tighten the spring cap securely or replace the valve seat if the membrane is damaged.
What should I do if the water pressure is low?
If the installation is correct but the output pressure is low, a clogged sieve may be the cause. Clean or replace the sieve to restore proper flow and pressure.
What spare parts are available for the pressure reducer 9000 / 9040?
Available spare parts include the spring cap with handle, adjustment scale, fixing screw, adjustment spindle assembly, and sealing ring. Replacement valve seats, sieve cups, and manometer stoppers are also available. Specific part numbers and sizes are provided for different configurations.