VAR-SPE K5 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How long is the product warranty?
The product is guaranteed against any technical defects for one year from the shipment date. The warranty covers the replacement or free repair of any products that have construction defects. The fault must be reported within 8 days of discovery.
What happens if the product is used incorrectly?
The warranty is no longer valid if the product is used or operated in a manner that does not conform to the relevant standards, or if the customer has performed any repairs or changes without prior authorization.
What types of oil are recommended for lubrication?
Recommended oils depend on the ambient temperature. For example, at temperatures between +2°C and +30°C, use UNIVIS N68, ARNICA 68, TELLUS S2 V 68, or BARTRAN HV68. For higher temperatures, use SHC 626 or Super 3000X1 5W40.
How often should the oil be changed?
Change the oil after the first 200 hours of operation and then every 2000 hours for mineral oils, or every 4000 hours for synthetic oils. Always use the oils specified in the manual.
What is the maximum input speed for the variator?
The maximum allowed input speed is 1750 rpm, equivalent to a 4-pole motor operating at 60Hz. Do not use 2-pole motors.
How should the variator be installed for vertical mounting?
For vertical installation, ensure the vent plug is at the top and the drain plug is at the bottom. Use the appropriate oil filling kit for positions V5 and V6. Avoid mounting with the feet on top, as this can damage the unit.
What are the temperature limits for the variator?
The maximum surface temperature the housing can reach depends on ambient temperature, operating hours, and load. At ambient temperatures below 40°C, the housing can reach temperatures up to 95°C for K4 and 85°C for K5 without affecting performance.
What should be done if the variator is stored for a long time?
For long-term storage, keep the variator in a dry, protected environment. Lubricate with grease and protect external parts from oxidation. Fill the unit completely with oil and run it at low speed without load for about half an hour upon installation.
How to adjust the output speed using the handwheel?
The handwheel allows precise adjustment of the output speed across the full range of revolutions. For example, at 1 rpm, the output speed for K2 is 250 rpm, while for K4 it is 162 rpm and for K5 it is 172 rpm.
What is the purpose of the speed limiter device?
The speed limiter device allows you to limit or exclude the reverse rotation adjustment. After setting the handwheel to the desired speed, tighten the locknut and adjust the counter-screw until it contacts the adjustment ring to set the maximum speed.