Beninca CORE 6B (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum motor power supported by CORE control unit?
The CORE control unit can be used to control a single motor with a power not exceeding 750W. Ensure that all electrical connections and logic comply with current regulations.
How do I connect the motor terminals to the control unit?
Connect the motor using MOT (move), COM (common), and MOT (move) terminals. Make sure the wiring is secure, properly insulated, and separated from other circuits if they carry different voltages.
What are the functions of the input/output terminals on CORE control unit?
The L-N-GND terminal provides power supply for 230Vac or 115Vac. The MOT-COM-MOT connects to the motor, while N-BLINK is used for a flashing lamp output. SWO and SWC are limit switches for opening and closing respectively.
How do I set up the pre-warning function on CORE control unit?
To activate or deactivate the pre-warning light, use DIP1 switch. When turned ON, it triggers a flashing signal before motor start. The P2 button can be used to toggle this feature.
What is the purpose of the TW trimmer on CORE control unit?
The TW trimmer adjusts the maximum duration for opening and closing operations. It should be set approximately 4 seconds longer than the actual stroke time, with a range from 3 to 180 seconds.
How do I configure the automatic closure function on CORE control unit?
Use TCA trimmer to adjust the auto-closure duration. When fully turned clockwise, it disables the feature and turns off the DL2 green LED indicator.
What is the role of DIP switches in configuring CORE control unit functions?
DIP switches allow configuration of various features such as torque settings, pre-warning activation, limit switch behavior, pedestrian mode operation, rapid closure, and radio transmitter compatibility.
How do I enter the service man mode on CORE control unit?
Set all DIPs to ON. In this mode, PHOT input acts as a close button (N.O.), P.P. input acts as an open button (N.O.), and SWO/SWC inputs are disabled.
How do I reset the memory of CORE control unit's radio receiver?
Press and hold both P1 and P2 buttons for about 10 seconds until both LEDs flash rapidly. After this, release them to complete the reset process.
What is the function of the built-in radio module in CORE control unit?
The built-in radio module supports remote controls with fixed or variable codes operating at a frequency of 433.92MHz. It can store up to 64 different code signals for wireless operation.
Related products from Beninca
CP.B24
User manual 40 pages
Think
User manual 11 pages
Think
User manual 44 pages
Think
User manual 48 pages
THINK-I
User manual 11 pages
THINK-I
User manual 48 pages
THINK-P
User manual 11 pages
THINK-P
User manual 48 pages
CORE
User manual 28 pages
CORE
User manual 32 pages
CORE
User manual 44 pages
CELL.P
User manual 32 pages
CELL.P
User manual 32 pages
CP.BN
User manual 44 pages
CP.BN
User manual 48 pages
BRAINY
User manual 52 pages
BRAINY
User manual 56 pages
CP.BISON OTI
User manual 52 pages
BRAINY 24
User manual 60 pages