IPC PW-H101 (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to start the high pressure washer?
To start the high pressure washer, turn the selector switch 'A' to position 'I'. In this position, you can adjust the water temperature from minimum to maximum using the regulator 'B'.
What does the 'ECO' mode do?
When the switch 'A' is set to position 'II' (ECO), the temperature regulator 'B' is disabled, and the water temperature is automatically set to 60°C.
How to activate the detergent solution?
To activate the detergent solution, set the switch 'A' to position 'III' (Chem). The water temperature can then be adjusted up to a maximum of 60°C using regulator 'B'.
What does the temperature indicator light mean?
The temperature indicator light (H) signals that the preset temperature has been reached. If the temperature is not achieved within 4 minutes, the light flashes rapidly, indicating the need to adjust the water flow.
What does the fuel level indicator light mean?
The fuel level indicator light (D) signals a low fuel level. If the light is on, it indicates that the fuel level is insufficient, and the burner may stop working.
How to check the working hours of the high pressure washer?
To check the working hours, set the switch 'A' to position 'I' and press the '+' key. The display will show the lance openings, followed by the hours of operation using hot or cold water.
What should I do if the high pressure washer stops after 90 seconds?
If the high pressure washer stops after 90 seconds, it may be due to a water shortage or a blockage in the high-pressure circuit. Check for leaks and ensure the water supply is adequate.
What does the 'TSI' status mean?
The 'TSI' status indicates a total stop mode. This occurs if the high pressure washer has not been used for more than 20 minutes. The indicator lights C and E will flash, and a message will appear on the display.
How to reset the fault indicators?
To reset the fault indicators, turn the main switch 'A' to position '0' and then back to position 'I'. This will clear the fault messages displayed on the screen.
What should I do if the high pressure washer does not start after a total stop?
If the high pressure washer does not start after a total stop, it may be in a locked state due to inactivity. Restart the device by turning the main switch 'A' to position '0' and then back to position 'I'.