Danfoss RT 5 (5 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the Danfoss RT 5 detect and control temperature?
The RT 5 uses a capillary sensor and a temperature bulb that change pressure with temperature. That pressure moves an internal element to open or close a mechanical switch, providing reliable, repeatable control without electronics. For best accuracy, mount the bulb where it senses representative temperature and avoid drafts or heat sources.
What temperature range can I set on the RT 5?
The RT 5 typically offers an adjustable setpoint range from about -5 °C to +30 °C, suitable for many refrigeration and HVAC tasks. This range enables precise control for both cooling and light heating; verify setpoint location in the actual environment and allow the system to stabilize after adjustments.
How should the capillary sensor be installed and routed?
Install the bulb in good thermal contact with the medium or a representative air pocket and route the capillary without sharp bends or kinks. Secure the capillary to prevent vibration damage and avoid routing near hot pipes or electrical heat sources. Proper routing improves response and long-term reliability.
What types of electrical loads can the RT 5 switch directly?
The RT 5 provides a mechanical contact suitable for typical control circuits and resistive loads; however, high inrush inductive loads like compressors or motors may require a relay or contactor. Always confirm the RT 5 contact ratings versus the load and use a protective switching device for heavy or inductive loads to extend contact life.
How do I adjust or calibrate the setpoint on the RT 5?
Setpoint adjustment is performed manually via the thermostat’s control knob or adjustment screw; allow the system to reach thermal equilibrium before finalizing the setting. The mechanical design provides straightforward adjustment and repeatability; for critical applications, verify setpoint with an independent thermometer after adjustment.
What routine maintenance does the RT 5 need to remain reliable?
Maintenance is minimal: inspect mounting, secure capillary, and check electrical contacts for wear or corrosion. Perform periodic functional checks under load to detect contact pitting or drift. Cleaning the housing and protecting the unit from moisture and contaminants prolongs life and maintains reliable switching performance.
Is the RT 5 suitable for outdoor or harsh industrial environments?
The RT 5 has a robust mechanical design, but direct outdoor exposure, heavy condensation, or corrosive atmospheres can degrade performance. For harsh conditions, install the thermostat in a suitable IP-rated enclosure and protect the capillary and bulb from environmental stress to ensure long-term reliability.
How quickly does the RT 5 respond to temperature changes?
Response speed depends on bulb placement and the thermal mass of the measured medium; mechanical capillary systems provide moderate response and are excellent for steady-state control. For faster reaction, place the bulb close to the sensing zone and minimize insulating layers between the bulb and measured medium.
Can the RT 5 be used for both refrigeration and heating control?
Yes, the RT 5 is suitable for both refrigeration and light heating applications within its setpoint range. Its mechanical switching offers simple, reliable control; when used in refrigeration, consider defrost cycles and compressor protection, and ensure the switch and external devices are sized appropriately.
What causes inaccurate readings and how can I troubleshoot them?
Inaccuracies typically arise from poor bulb placement, kinks or damage to the capillary, thermal gradients, or worn contacts. Troubleshoot by visually inspecting the capillary and bulb, confirming secure mounting, checking switch continuity, and comparing readings to an independent thermometer. Replace the thermostat if mechanical wear affects operation.
Related products from Danfoss
RA-URX
User manual 2 pages
RLV-X
User manual 2 pages
013G7360
User manual 2 pages
013G7390
User manual 2 pages
AKV 10-1
User manual 2 pages
AKV 10-2
User manual 2 pages
AKV 10-4
User manual 2 pages
AKV 10-3
User manual 2 pages
AKV 10-5
User manual 2 pages
AKV 10-6
User manual 2 pages
ChangeOver6
User manual 2 pages
ETS 100
User manual 2 pages
ETS 100
User manual 2 pages
ETS 50
User manual 2 pages
ETS 50
User manual 2 pages
ETS 25B
User manual 2 pages
ETS 25B
User manual 2 pages
KVS 42
User manual 2 pages
ETS 6
User manual 2 pages
EV220B 65-100
User manual 2 pages