Kicker KXMARLC (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the power wiring for the KXMARLC?
To install the power wiring, first disconnect your vehicle's battery to prevent electrical shorts. Connect the ground wire to the GND terminal of the Quick-Connect Power Plug and run the power cable toward the battery. Install a 2A fuse within 7 inches (18cm) of the battery and in-line with the amplifier’s power cable. Finally, connect the positive power wire to the +12V Constant terminal on the Quick-Connect Power Plug.
What is the recommended mounting location for KXMARLC?
Mount the KXMARLC Processing Unit in a structurally sound area that allows easy access for wiring connections. Ensure it's not exposed to direct water or splashes, and avoid areas where installation might damage gas tanks, brake lines, or wiring. For flush mounts, use cutouts measuring H: 25mm, W: 178mm, D: 62mm.
How do I connect the audio signals to KXMARLC?
Connect your source unit’s output to the RCA input of the KXMARLC. Use an RJ-11 cable to link the Processor Unit with each zone on the Remote Volume Controller, and then attach the zoned RCA outputs from the processor to your amplifiers’ inputs for optimal signal transfer.
What are the key specifications of the KXMARLC?
The KXMARLC has a rated output per channel of 8V at 1KHz, 14.4 VDC with THD < 1%. It features an input sensitivity range from 0.125 to 4.0 volts AC and offers a signal-to-noise ratio of 100dB. The input impedance is 10k ohms while the output impedance is 100k ohms, ensuring high-quality audio performance.
Can I use KXMARLC with any amplifier?
Yes, you can pair the KXMARLC with any of our KICKER amplifiers for full control over your sound system. It provides a clean and strong signal output that is ideal for high clarity in various marine or automotive applications.
What safety precautions should I take when installing?
Always disconnect the battery before starting installation to avoid electrical shorts. Ensure all mounting screws do not puncture gas tanks, brake lines, or wiring and are secure enough to prevent movement during sudden stops or accidents. Use only genuine KICKER accessories for marine installations.
How does the remote volume control work?
The KXMARLC allows you to adjust zone-specific volumes remotely using its 8-channel output (4 stereo zones). Connect your source unit’s remote wire to the REM IN terminal, and link it with the amplifier's remote input for synchronized power on/off functionality across all connected devices.
What is the recommended fuse rating for KXMARLC?
A 2A fuse should be installed within 7 inches (18cm) of your battery to protect against overcurrent. This ensures safe operation and prevents damage from electrical surges when using the KXMARLC in marine or automotive environments.
How do I connect multiple zones with KXMARLC?
Each zone can be connected via an RJ-11 cable to the corresponding remote volume controller. The processor unit sends a clean, amplified signal through each channel for separate control of up to four stereo zones in your audio system.
What is the purpose of KXMARLC's ventilation requirements?
Proper ventilation ensures that both amplifiers and subwoofers do not overheat. The KXMARLC requires at least 4 inches (10cm) of open space for airflow, while subwoofers need a minimum clearance of 1 inch (2.5cm) from the front to any surface to maintain safe operating temperatures.