Log in


or


google Continue with Google

Already have an account?

Nice DPRO500 (104 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The DPRO500 control unit is designed for use in automated shading systems. It enables precise control of motorized blinds and shutters, ensuring smooth and reliable operation. The unit features a user-friendly interface and can be integrated into larger building automation systems. It supports various communication protocols and is suitable for both residential and commercial applications. The DPRO500 is built to withstand demanding environmental conditions and offers long-term durability and performance.

Frequently Asked Questions

What are the safety warnings for installation and use?

The product must be installed and used in accordance with safety regulations. Ensure all instructions are followed to prevent serious damage. The product should not be used in areas with an explosion risk. Qualified technicians must handle installation, testing, and maintenance. Keep children away from the control devices and ensure complete disconnection from the power supply.

How do I connect the three-phase power supply?

Connect a 16 A CEE plug to terminals L1, L2, L3, and the PE terminal. Ensure the power supply is disconnected before making any connections. Use the correct cable type and length as specified in the technical specifications.

How do I connect the single-phase power supply?

Connect a Schuko plug to terminals L1, L3, and the PE terminal. Ensure the power supply is disconnected before making any connections. Use the correct cable type and length as specified in the technical specifications.

What is the function of the STOP SAFETY EDGE input?

The STOP SAFETY EDGE input is used to stop a maneuver in progress and initiate a short reverse maneuver. It can be connected to optical sensitive edges (OSE) or devices with 8.2 kΩ resistance. The control unit recognizes the type of device and stops the maneuver if any variation in the recognized status occurs.

How do I reset the control unit?

To reset the control unit, set dip switches 1-2-34 to OFF, press and hold the STOP button until the red LED comes on and remains lit, then release the button. This procedure must be repeated if a modification is made to the devices connected to the 'STOP Safety Edge' terminal.

What are the electrical connection requirements for the control unit?

Ensure the power supply is disconnected before making any electrical connections. Use the correct cable types and lengths as specified in the technical specifications. Connect the power supply cable, motor cable, and accessory cables according to the wiring diagrams and instructions.

How do I connect a radio receiver?

Disconnect the power supply from the control unit and insert the radio receiver into the SM connector. Refer to the instruction manual for the receiver for details on the commands and outputs. The control unit will perform specific actions based on the activated outputs or commands sent by the radio receiver.

What are the operating modes for the control unit?

The control unit supports various operating modes such as Step-by-Step, Partial Open, Open, Close, Photo, and Alt in opening or closing. These modes can be programmed using the Nice Oview programmer. The default settings may be changed during the position acquisition phase or through the programmer.

How do I connect mechanical limit switches?

Connect the mechanical limit switches to the LIMIT SWITCH input. Ensure the correct wiring and configuration to control the opening and closing positions of the gate. The control unit will recognize the positions and stop the gate at the maximum opening or closing position.

What are the safety precautions for electrical connections?

Always disconnect the power supply before making any electrical connections. Use qualified personnel for installation and maintenance. Ensure the disconnection device has contacts with sufficient opening distance to allow complete disconnection. The disconnection device must be visible from the automation mechanism to prevent accidental reconnection.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5