Nice UST2 (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the UST2 control unit used for?
The UST2 is a control unit for industrial doors, specifically for automated roller shutters and sectional doors with three-phase motors in man-present mode. It allows for the opening and closing of doors via integrated buttons or external controls.
What safety precautions should be taken when installing the UST2?
Always follow the safety instructions in the manual. Ensure the system is disconnected from the electrical supply during installation. Avoid placing devices near heat sources or flames, and ensure all electrical connections are made correctly to prevent damage or hazards.
How do you connect the power cable to the UST2?
Connect the power cable to the L1, L2, L3 terminals and the PE terminal of the base board. Use a 16A CEE plug and protect the cable with 3x10A fuses. Ensure the motor reducer is properly connected and the phase sequence is correct.
How do you set the mechanical limit switches on the UST2?
Set the mechanical limit switches in man-present mode by positioning the door at the desired closed or open position. Use the contact cams and adjustment screws to set the switches accurately. Ensure the safety limit switches are activated after the main limit switches.
What are the technical specifications of the UST2?
The UST2 operates on 3 x 230V/400V AC 50Hz, with a maximum motor power of 2.2 kW. It has a protection class of IP54 (IP65 on request) and dimensions of 88 x 52 x 170 mm. It uses a 24V DC control voltage with a 0.8A delayed fuse.
How do you connect external control buttons to the UST2?
External control buttons can be connected to the X3 terminal block. The open and close buttons should be wired as normally closed contacts, while the stop button should be connected as a normally open contact. Remove the jumper from J10 if using a stop button.
What is the function of the safety limit switches on the UST2?
The safety limit switches are designed to stop the door movement in case of an obstruction or emergency. They are connected to the STOP terminal and must be activated after the main limit switches to ensure proper operation and safety.
How do you connect a photoelectric barrier to the UST2?
Connect the photoelectric barrier to the X3 and X5 terminal blocks. The barrier should be connected to a 8.2 kOhm resistor for monitoring. If the infrared beam is interrupted during door closure, the door will stop automatically.
What should be done with the UST2 after installation?
After installation, ensure all connections are secure and the device is properly grounded. Test the system thoroughly to confirm all functions work as intended. Keep the manual in a safe place for future reference and maintenance.
What are the disposal instructions for the UST2?
Dispose of the UST2 in accordance with local regulations. Separate metals, plastics, electrical components, and lubricants for proper recycling. Do not dispose of the device in regular waste, as it contains materials that require special handling.
Related products from Nice
TOO3000
User manual 44 pages
TOO4524
User manual 44 pages
TOO3024
User manual 44 pages
TOO4500
User manual 44 pages
Neo
User manual 6 pages
A3
User manual 12 pages
HSSO1
User manual 12 pages
SPIDER 6065
User manual 12 pages
SPIDER 6065
User manual 44 pages
SPIDER 6100
User manual 12 pages
SPIDER 6100
User manual 44 pages
SingleSwitch-Control
User manual 20 pages
TCE
User manual 28 pages
TT4
User manual 32 pages
TT5
User manual 32 pages
OTA 30
User manual 44 pages
SPIDER 6060
User manual 44 pages
mindy TT1L
User manual 44 pages
mindy A01
User manual 48 pages
IB
User manual 52 pages