V2 FLEXY2 (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power supply for the FLEXY2 unit?
The FLEXY2 unit is powered by either 230V / 50Hz or 120V / 60Hz, depending on the model, and is designed to operate with two single-phase motors totaling 700W.
What is the maximum load for the motors?
The maximum load for the motors is 700W, and the maximum load for accessories powered by 24VAC is 3W.
What are the operating temperature limits for the FLEXY2 unit?
The operating temperature range for the FLEXY2 unit is from -20°C to +60°C.
What are the fuse ratings for the FLEXY2 unit?
The FLEXY2 unit is protected by fuses rated at F1 = 5A delayed and F1 = 8A delayed.
How do you connect the photocells to the FLEXY2 unit?
Connect the power cables of the photocells between the L10 (GND) and L11 (+) terminals of the FLEXY2 unit. Ensure the photocell is properly connected to the unit for safe operation.
What is the function of the START P. button?
The START P. button is used for pedestrian start, which causes partial opening of the gate connected to motor 1. Subsequent commands will follow the step-by-step logic.
How do you configure the logic of operation for the FLEXY2 unit?
The logic of operation can be configured using the dip switches on the unit. Each dip switch controls a specific function, such as automatic closure, start logic, or speed control.
What is the purpose of the delay function in the FLEXY2 unit?
The delay function controls the time interval between the opening and closing of the two gates. It can be set between 0 and 90 seconds.
How do you test the photocells on the FLEXY2 unit?
The FLEXY2 unit performs a test of the photocells before each opening or closing operation. If the photocells are not functioning correctly, the gate will not move and a 8-second indicator light will flash.
How do you reset the FLEXY2 unit to a new programming state?
To reset the FLEXY2 unit, turn off the power, press and hold the PROG.RX button while reapplying power. The L1 LED will light up, and after releasing the button, the unit will be ready for new programming.