Vision Techconnect Control (152 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cable length for IR connections?
There is no theoretical cable length limit for IR cables. However, performance may degrade with longer distances. Ensure the remote control is within 100mm of the IR receiver and shield from ambient light for optimal results.
How do I program a single IR device using simple mode?
To program a single IR device, press and hold button 3, then press and hold button 4. The learn LED will turn red. Press the function button you want to assign the code to, then point the remote at the control module and press the button until the green confirmation LED flashes.
What is the purpose of the Learn Mode LED?
The Learn Mode LED (red) indicates that the control module is in programming mode and is actively learning a new IR code. It remains lit until the code is successfully learned or the process is canceled.
Can I use the TC3-CTL with RS-232?
Yes, the TC3-CTL supports RS-232 for professional control of devices like projectors. It uses two-way communication to confirm commands and requires a 3-core cable. Ensure the control module is mains-powered when using RS-232.
How do I connect the TC3-CTL to a computer for advanced programming?
Connect the control module to your computer via the USB-B mini connector located in the battery compartment. Download the software from Vision’s website and launch it to create, edit, or sync programs with the device.
What is the function of the 12V Trigger output?
The 12V Trigger output is used to activate projection screens or other devices that respond to a simple trigger voltage. It requires a 2-core unshielded cable and ensures the control module is mains-powered when in use.
How do I set up multiple devices as a master-slave configuration?
When using two devices next to each other, configure them as master and slave by connecting them via RS-485 A to A and B to B. This allows extended control and communication between devices.
What should I do if the TC3-CTL fails to learn an IR code?
If the TC3-CTL fails to learn an IR code, ensure the remote is within 100mm of the IR receiver, not angled, and shielded from ambient light. Try again, and if the issue persists, check the remote’s compatibility or try a different remote.
How do I disable the automatic double send function for button 2?
The automatic double send function for button 2 can be disabled using the computer software. This is useful if you want to prevent the button from sending the code twice, such as when controlling a projector off.
What is the purpose of the RS-485 port on the TC3-CTL?
The RS-485 port is used to connect additional control modules or extension keypads, allowing for extended control over longer distances. It uses the same codes as RS-232 but supports up to 100m cable length with only a 2-core cable.