Comunello CU 24V HP (64 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power supply for the main unit?
The control unit requires a 24V DC power supply. The motor power supply uses two cables with cross-sectional area of 2x2,5mm² for lengths up to 50 meters.
How do you connect the flashing light cable?
Use two cables with cross-sectional area of 2x0,5mm² for short connections (up to 1m) or 2x1,0mm² for longer runs. The maximum current rating is 4A or 5A depending on installation.
What are the cable specifications for the photocell TX?
The photocell transmitter uses two cables with cross-sectional area of 2x0,5mm² for short connections (up to 1m) or 2x1,0mm² for longer runs. The maximum current rating is 4A or 5A depending on installation.
What are the cable specifications for the photocell RX?
The photocell receiver uses four cables with cross-sectional area of 4x0,5mm² for short connections (up to 1m) or 4x1,0mm² for longer runs. The maximum current rating is 7A.
How do you connect the key selector cable?
The key selector uses three cables with cross-sectional area of 3x0,5mm² for short connections (up to 1m) or 3x1,0mm² for longer runs. The maximum current rating is 6A.
What are the cable specifications for the limit switch?
The limit switch uses three cables with cross-sectional area of 3x0,5mm² for short connections (up to 1m) or 3x1,0mm² for longer runs. The maximum current rating is 6A.
How do you connect the encoder cable?
The encoder uses three cables with cross-sectional area of 3x0,5mm² for short connections (up to 1m) or 3x1,0mm² for longer runs. The maximum current rating is 6A.
What type of cable should be used for the antenna connection?
Use RG58 coaxial cables with a maximum length of 20 meters and ensure compliance with CEI EN 50267-2-1 standards to maintain signal integrity and safety.
How is the motor power supply configured in the control unit?
The main motor uses two cables for its power supply. For lengths up to 20 meters, use 2x2,5mm² cables; for longer runs (up to 50 meters), use 2x4,0mm² cables.
What is the function of the 'Step by Step' mode in the control unit?
The 'Step by Step' mode allows manual operation of the system. It enables users to test and adjust settings individually without automatic closure or programmed timing functions being active.