Sentiotec Pro D3i (492 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum heating power per circuit?
The Pro D series sauna controllers are designed to manage up to three heating circuits, each with a maximum heating power of 3.5 kW. The maximum vaporizer power is also 3.5 kW, and the maximum additional output power is 3.5 kW.
How high should the controller be mounted?
The controller should be mounted outside the sauna cabin at a height of approximately 1.70 meters or as recommended by the cabin manufacturer. The ambient temperature should be between -10 °C and 40 °C.
What safety precautions are required during installation?
Installation must be performed by a qualified electrician or similarly trained person. Work should only be carried out when the system is de-energized. A three-phase isolation device with full disconnection according to overvoltage category III must be installed by the builder.
What is the purpose of the temperature sensor?
The oven sensor (F1) is used to monitor the temperature inside the sauna and prevent overheating. It must be installed in a location where it is not affected by incoming air to ensure accurate readings.
What is the recommended wire size for the oven connection?
The oven cable must have a cross-sectional area of at least 2.5 mm² and must be temperature-resistant up to 150 °C to ensure safe and reliable operation.
What are the safety requirements for users?
The sauna controller should not be used by children under 8 years old. Children over 8 years old, individuals with reduced mental or physical abilities, and those without sufficient experience should only use it under supervision or after being shown how to use it safely. Ensure no flammable objects are on the sauna heater before starting the controller or activating the remote standby mode.
What is the function of the humidity sensor?
The humidity sensor (FTS2) is used to monitor the moisture level in the sauna environment, particularly for Pro D3 and Pro D3i models. It helps maintain optimal humidity levels for comfort and safety during sauna use.
What should be done before turning on the sauna controller?
Before turning on the sauna controller, ensure that no flammable objects are placed on the sauna heater or infrared heater. This helps prevent potential fire hazards and ensures safe operation.
What is the purpose of the safety shutdown?
The safety shutdown feature is designed to automatically disconnect the power supply in case of overheating or other critical conditions. This helps prevent damage to the system and ensures user safety during operation.
What are the technical specifications for the Pro D series controllers?
The Pro D series controllers are designed for use with sauna heaters that meet the EN 60335-2-53 standard. They support up to three heating circuits with a maximum power of 3.5 kW per circuit, a maximum vaporizer power of 3.5 kW, and an additional output power of 3.5 kW. They also include safety features such as temperature sensors and safety shutdown mechanisms.
Related products from Sentiotec
1-053-313
User manual 181 pages
1-053-313
User manual 76 pages
MySentio Wifi
User manual 76 pages
MySentio Wifi
User manual 181 pages
S-WIFI01
User manual 76 pages
S-WIFI01
User manual 181 pages
Pro D2
User manual 142 pages
Pro D2
User manual 492 pages
Pro D3
User manual 142 pages
Pro D3
User manual 492 pages
K1 NEXT
User manual 164 pages
Pro-B3
User manual 78 pages
Pro-B3
User manual 216 pages
S2-18
User manual 40 pages
S2-18
User manual 76 pages
S2-18S
User manual 40 pages
S2-18S
User manual 76 pages
S2-30
User manual 40 pages
S2-30
User manual 76 pages
1-052-786
User manual 44 pages