Danfoss ERC 213 (152 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the ERC 213 controller used for?
The ERC 213 is a smart, multipurpose integrated refrigeration controller with temperature and defrost management, available with 3 relays. It is designed for operating temperature sensing control, suitable for refrigeration and heating applications.
How many relays does the ERC 213 have?
The ERC 213 controller is equipped with 3 relays, enabling direct connection of heavy loads without the need for an intermediate relay, up to 2 hp compressors depending on power factor and motor efficiency.
What are the technical highlights of the ERC 213?
The ERC 213 features ease of use with four buttons and a simple menu structure, energy efficiency through defrost on demand and smart fan management, unit protection against power fluctuations and high condensing temperatures, and a wide range of compatible sensors for flexible installation.
How do you perform a factory reset on the ERC 213?
To perform a factory reset, press and hold the power button until the display shows 'FAC'. This will reset the controller to its default settings, ensuring a clean configuration for setup.
How do you select a pre-installed application during quick configuration?
During quick configuration, press the BACK button for 3 seconds after power on to access the main switch. Then, select the desired application (e.g., AP0 to AP6) using the UP/DOWN buttons and confirm with SET.
How do you set the sensor type on the ERC 213?
To set the sensor type, navigate to the 'o06' parameter in the configuration menu. Choose from options like NTC 5 K, NTC 10 K, PTC, or Pt1000, and confirm with the SET button. All sensors must be the same type.
How do you adjust the temperature setpoint?
To adjust the temperature setpoint, press the SET button briefly to enter the setting mode. Use the UP/DOWN buttons to change the temperature, and press SET again to save the new setpoint.
How do you initiate a manual defrost?
To initiate a manual defrost, press the DEFROST button for 3 seconds. The DEFROST icon will appear on the display during the defrost cycle. Press DEFROST again for 3 seconds to stop the defrost manually.
What are the display icons on the ERC 213?
The ERC 213 display includes icons for night mode (energy saving), fan running, defrost, compressor running (which flashes in pull-down mode), active alarm, and the unit temperature in °C or °F.
How do you access the main configuration menu?
To access the main configuration menu, press the SET button for 3 seconds. This will allow you to navigate through status, setup, and service parameters, including the 'CFg' menu for advanced settings.
Related products from Danfoss
EKC 201
User manual 6 pages
EKC 301
User manual 6 pages
Icon Display 24V
User manual 2 pages
Icon Display 24V
User manual 2 pages
Icon Display 24V
User manual 2 pages
Optyma Plus
User manual 36 pages
Optyma Plus
User manual 40 pages
VRH 120
User manual 4 pages
VRH 60
User manual 4 pages
EKC 102B
User manual 8 pages
EKC 102C
User manual 8 pages
ERC 211
User manual 152 pages
ERC 214
User manual 152 pages
ECL Comfort 210
User manual 36 pages
ECL Comfort 310
User manual 36 pages
AK-PC 551
User manual 12 pages
ECL Comfort 296
User manual 36 pages
EKC 202D
User manual 12 pages
EKC 202D
User manual 12 pages
EKC 302D
User manual 12 pages