Log in


or


google Continue with Google facebook Continue with Facebook

Already have an account?

Dimplex WPM EconPlus (144 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Dimplex WPM EconPlus Controller is designed for efficient operation of heating systems. It features an intuitive interface and precise temperature control, ensuring optimal comfort and energy efficiency. The controller supports various system configurations and includes safety functions to prevent overheating. It is compatible with a range of Dimplex heating products and is built for reliable long-term use in residential and commercial applications.

Frequently Asked Questions

How to set the language on the device?

To set the language, navigate to the menu option 1 (Settings) using the arrow keys ( and ) and confirm by pressing the ENTER key ( ). Select the desired language using the arrow keys and confirm with ENTER or cancel with ESC.

What are the installation instructions for the heat pump manager?

The heat pump manager should be mounted on the wall using the provided screws and wall plugs. Ensure the regulator is not exposed to moisture and is installed in a dry area with temperatures between 0 °C and 35 °C. Follow the detailed steps for securing the device and marking the mounting holes.

What temperature sensors are required for the heating system?

Depending on the heat pump type, the following temperature sensors are required: outdoor temperature sensor (R1), supply temperature sensor (R9), return temperature sensor, and temperature sensors for each heating circuit (R2, R5, R13). The sensors must be installed in accordance with the specified wiring and sensor characteristics.

How to connect the power supply for the heat pump?

The 3- or 4-core power supply for the heat pump is connected from the heat pump meter through the EVU lockout switch (if required) to the heat pump. The cable cross-section must comply with DIN VDE 0100, and the circuit must be protected by a universal circuit breaker with C-characteristic and common tripping.

What is the purpose of the EVU lockout switch?

The EVU lockout switch (K22) is used to disconnect the power supply to the heat pump during maintenance or service. It must be sized according to the heat pump's power rating and installed by the manufacturer. The switch's auxiliary contact (13/14) is connected to the control unit (N1-J5/ID3).

How to connect the heating circuit relay?

The heating circuit relay (K20) for the immersion heater (E10) is connected to the control unit via the terminals X1/N and N1-J13/NO 4. The relay must be sized according to the heating element's power rating and installed by the manufacturer.

What are the wiring requirements for the heating system?

The wiring for the heating system must comply with DIN VDE 0100. The cable cross-section must be at least 0.75 mm², and all circuits must be protected by appropriate fuses or circuit breakers. The control unit's terminals must be connected according to the manufacturer's specifications.

How to connect the outdoor temperature sensor?

The outdoor temperature sensor (R1) should be mounted on the exterior wall of a heated room, preferably on the north or northwest side. Avoid placing it near windows, doors, or other heat sources. Ensure the sensor is fully exposed to weather conditions and not shaded.

What is the maximum length for temperature sensor cables?

Temperature sensor cables can be up to 40 meters long, provided the cable cross-section is at least 0.75 mm². The cable's outer diameter should be between 4 and 8 mm. Ensure the cables are properly insulated and protected from physical damage.

How to install the immersion heater temperature sensor?

The immersion heater temperature sensor (R13) should be installed in the heat source or in the buffer tank. Ensure the sensor is fully immersed in the fluid and secured to prevent movement. The sensor must be connected to the control unit according to the wiring diagram.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5