Dometic DSP-EM (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I access the service menu?
To access the service menu, press the round selector button on the DSP-EM for eight seconds until the symbol appears. Then release the button, and the display will show 'S-00'.
What is the purpose of the standby mode?
The standby mode allows the inverter to switch to a low-power state when no load is present. It can be toggled on or off using the service code S-03.
How do I set the output voltage?
Use the service code S-01 to set the output voltage of the inverter. The available options are 230 V or 240 V, with a default value of 230 V.
What is the function of the standby timer?
The standby timer (service code S-04) sets the duration the inverter remains in standby mode before it automatically switches off. It can be set between 5 minutes to 30 minutes or 1 hour to 24 hours.
How do I adjust the battery charging current?
Use the service code S-14 to set the maximum battery charging current as a percentage of the rated charging current. The available options are 25%, 50%, 75%, or 100%, with a default of 50%.
What is the role of the battery cable length setting?
The battery cable length (service code S-19) compensates for voltage drop by setting the length of the cable between the battery and the inverter. It can be adjusted between 0.1 meters to 5 meters.
How do I configure the UPS function?
The UPS function (service code S-23) allows the inverter to provide uninterrupted power supply to connected devices. It can be enabled or disabled using the ON/OFF setting.
What is the purpose of the end-of-charge voltage setting?
The end-of-charge voltage (service code S-15) determines the voltage at which the battery charging process stops. It can be set between 13.5 V to 15 V in 0.1 V increments, with a default of 14.4 V.
How do I set the battery type?
Use the service code S-12 to select the battery type. Options include lead acid (0), gel (1), AGM (2), eStore (3), and custom (4). The default is lead acid.
What is the function of the factory settings option?
The factory settings (service code S-35) reset all configuration parameters back to their default values. This option is useful for restoring the device to its original state.