Emerson DL8000 (74 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power requirement for the DL8000?
The DL8000 requires 100 to 240 V ac with a tolerance of +10%/–15%, operating at 50 to 60 Hz, with a 1-phase 30-watt nominal power rating.
What materials are used in the DL8000 enclosure?
The DL8000 enclosure is made of IP66-rated, weatherproof, corrosion-resistant cast aluminum with stainless steel bolts. The wire channel covers are made of polypropylene plastic, and the modules are made of thermoplastic polyester, which is solvent-resistant.
What are the operating temperature ranges for the DL8000?
The operating temperature range for the DL8000 is –40°C to +65°C. The LCD display operates within –20°C to +65°C, and the certified temperature range is –25°C to +55°C.
How should the DL8000 be mounted?
The DL8000 should be mounted with four M10-1.5 x 15mm threaded bolts. It can be bottom-mounted or rear-mounted, but bottom-mounting is preferred due to its weight. The mounting panel should be a mild steel member with four 11.5mm diameter holes.
What are the grounding requirements for the DL8000?
The DL8000 has one external ground lug and two internal ground lugs. If grounding is required, ensure that the earth ground has an impedance of 25 ohms or less. Avoid tying the DL8000 to cathodic protection systems on pipelines.
How do you connect the AC power to the DL8000?
Connect the AC power to the terminal blocks on the front of the DL8000. Use number 6 spade terminals for connections. For 115 volts, connect the line wire to HOT (L1) and the neutral to L2. For 230 volts, connect one line wire to HOT (L1) and the other to L2. Keep AC wiring away from DC signal circuits to minimize noise.
What should you do if the DL8000 is not operating correctly?
If the DL8000 is not operating correctly, check the wiring and grounding. If the issue persists, try a warm start, cold start, or reset using the Reset button on the CPU module. If problems continue, contact your local sales office for return authorization.
How do you reset the DL8000?
To reset the DL8000, first remove power from the unit. Then, press and hold the Reset button on the CPU module for 15 seconds using a pen or stylus. Ensure the area is non-hazardous before performing this procedure.
What are the dimensions and weight of the DL8000?
The DL8000 weighs 34 kg for the housing, backplane, and CPU. The mounting height should be approximately 1.14 to 1.27 meters above grade to the bottom of the case. The case has a 2° taper to the rear.
What are the compliance standards for the DL8000?
The DL8000 complies with European Directives 2004/108/EC (EMC), 94/9/EC (ATEX), and 2004/22/EC (MID). It is evaluated against standards such as EN 55011, EN 61000-4-2, EN 61000-4-3, and others for electromagnetic compatibility, electrostatic discharge immunity, and surge immunity.