Futurelight CP-256 (78 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How many DMX channels does the CP-256 support?
The CP-256 DMX-Controller supports 256 control channels, allowing for precise control of up to 16 projectors, each with 16 DMX channels. This provides detailed control over pan and tilt movements with 16-bit resolution.
What are the main features of the CP-256?
The CP-256 is a universal DMX-Controller with 256 control channels, 16-bit resolution for smooth pan and tilt movements, a comprehensive projector library, 16 programmable scenes, 16 preset scenes, 16 preset macros, and support for 5 languages. It also includes a blackout function, music control via audio input or built-in microphone, and a password-protected access system.
How do you connect the CP-256 to a projector?
To connect the CP-256 to a projector, use a two-pole shielded cable with 3-pin XLR connectors. The DMX output of the CP-256 should be connected to the DMX input of the first projector in the chain. Ensure that the data cable's wires do not touch each other to avoid interference. For multiple projectors, connect each subsequent projector's DMX input to the previous one's output.
How do you set the DMX start address for a projector?
The CP-256 assigns DMX start addresses in 16-step increments. Each projector must be coded to its desired start address to ensure correct channel assignment. Projectors with the same address will operate in sync. For example, Projector 1 uses start address 1, Projector 2 uses 17, and so on.
What is the purpose of the blackout function?
The blackout function on the CP-256 locks out the light output of all connected devices using the shutter and stops the program. This is useful for creating dark scenes or transitions. When a program is called, the blackout button must be pressed (LED does not light up) to ensure no light output is visible.
How do you control the projector manually?
To manually control a projector, press the Manual button on the CP-256. This allows you to adjust the projector's settings directly using the channel faders. You can also use the joystick for manual control of the projection mirror.
How do you program a preset scene?
To program a preset scene, navigate to the Preset Scenes section in the menu. Select the desired scene, and use the channel faders to adjust the DMX values. Once configured, you can save the scene for later use. Preset scenes can be edited or copied as needed.
What is the function of the music control feature?
The music control feature allows the CP-256 to synchronize lighting effects with audio signals. You can connect an audio input via a 6.3 mm stereo jack or use the built-in microphone. When the controller is in audio mode, the LED will blink, indicating that music-driven lighting effects are active.
How do you change the projector's name or settings?
To rename a projector or adjust its settings, navigate to the 'Grundeinstellungen' section in the menu. Here, you can rename the projector, change the effect name, set the projector type, and adjust other properties such as the joystick sensitivity and operating hours.
What is the recommended way to install the CP-256 in a rack?
The CP-256 is designed for a 19" rack (483 mm) and should be installed in a 'Double-Door-Rack' that allows access to both the front and back. Ensure the rack is equipped with a fan to prevent overheating. Place the controller with enough space for airflow and avoid proximity to other devices to prevent heat buildup.