Helo RA 18 (89 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum sauna time?
The maximum sauna time is 6 hours. The preset time can be set up to 23 hours before the sauna session starts.
How do you start the sauna?
To start the sauna, press the On/Off button on the control panel. This activates the control panel and initiates the preset time and temperature settings.
How do you adjust the preset time?
Use the + or - buttons to adjust the preset time. Holding the button down speeds up navigation. The settings are saved in memory if not changed within 5 seconds.
How do you adjust the sauna temperature?
Press the + or - buttons to adjust the sauna temperature. The setting is saved by pressing the OK button or waiting approximately 5 seconds after making the change.
How do you adjust the sauna duration?
Press the + or - buttons to adjust the sauna duration. The setting is saved by pressing the OK button or waiting approximately 5 seconds after making the change.
What happens if the preset time is 0.00?
If the preset time is 0.00, the sauna starts immediately after the temperature and time settings are confirmed. The temperature display shows the current room temperature, and the time display shows the remaining sauna time.
What error codes can appear?
The control panel displays error codes if issues occur during operation. These include Err 1 (overheating protection tripped), Err 2 (faulty thermostat or cable), and Err 3 (communication failure between the sauna and control panel).
How do you install the control panel?
Install the control panel on the wall using the provided screws. Ensure it is mounted on an approved installation area. Use a level to keep it straight during installation.
How do you remove the control panel?
To remove the control panel, gently press the edges with a thin wire or small screwdriver to release the clips, then carefully lift it off.
How should the product be disposed of?
At the end of its life cycle, the product should not be disposed of with regular household waste. Instead, it should be delivered to a collection point for the recycling of electrical and electronic devices.