Hunter PRO-HC (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the Pro-HC controller?
Start by choosing a location with good Wi-Fi coverage. Use the hole at the top of the controller as a reference to secure a 1" screw into the wall. Align the controller with the screw and slide the keyhole over it. Secure the controller in place by installing screws in the other mounting holes.
What hardware is included in the Pro-HC box?
The Pro-HC box includes a Wi-Fi controller, a 24 VAC transformer (indoor model) or built-in transformer (outdoor model), three screws, three wall anchors, three wire nuts for U.S. outdoor models, and one terminal block for European outdoor models.
How do I connect AC power to the Pro-HC controller?
For indoor models, route the transformer cable through the bottom left hole and connect the yellow wires to the 24AC screws and the green wire to GND. For outdoor models, connect the wires to the transformer inside the junction box and use a UL-listed conduit with a male adapter. Always use a licensed electrician for outdoor installations.
How do I connect station wires to the Pro-HC controller?
Route valve wires between the control valve location and the controller. Attach a common wire (usually white) to all solenoid wires and a separate control wire to each valve. Use waterproof connectors for all splices and connect the common wire to the COM terminal on the controller.
How do I connect sensors or flow meters to the Pro-HC controller?
Connect one sensor wire to the COMMON terminal on the controller. Connect the Normally Closed or Normally Open wire from the sensor to SEN-1 or SEN-2. For flow meters, connect blue wires to SEN-1 and SEN-2, white to SEN COM, and leave red unconnected. Refer to the sensor or flow meter instructions for full details.
How do I connect the Pro-HC controller to a Wi-Fi network?
When the controller is first powered on, it will run a wizard to connect to your wireless router. Select your network from the list on the controller display and press Confirm. Enter your Wi-Fi password and press OK. The Wi-Fi icon will flash during connection and stop once successful.
How do I configure the Pro-HC controller with the Hydrawise app?
To connect the Pro-HC controller to the Hydrawise app, register for an account at hydrawise.com and log in. Follow the on-screen setup wizard to configure your controller. The owner’s manual and app instructions are available at hydrawise.com/support.
What should I do if my Wi-Fi network is not listed during setup?
If your network is not listed, check if the unit is within wireless range. Ensure the controller is properly connected to power and the Wi-Fi signal is strong enough. If the issue persists, try restarting the controller or rechecking the network settings.
What happens if the Pro-HC controller loses power?
The Pro-HC controller has non-volatile memory, so the program, clock, and calendar will be retained during a power outage. Watering will not occur without AC power, and the controller will resume normal operation once power is restored.