roco Lokmaus 2 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What can the Lokmaus 2® do?
The Lokmaus 2® can manage up to 99 different locomotive addresses, control lights and 4 additional functions, set speed and direction via a knob, program CV1 to CV5, program CV29 for locomotive operation, display set addresses or other information on a two-digit display, control locomotives with 14, 28, or 128 speed steps, initiate an emergency stop, autoconfigure dataBUS device addresses, support up to 31 input devices, allow changing basic settings, provide child safety for sensitive functions, control magnet article decoders, and is compatible with other NMRA-compatible controllers.
How to connect the Lokmaus 2®?
Connect the track cable to the track out port of the amplifier, then connect the two-pole cable of the amplifier to the transformer terminals. Plug the Western connector of the Lokmaus 2® into the Master port of the amplifier. The Slave port is for connecting additional Lokmäuse. Use the dataBUS distributor 10758 if connecting multiple Lokmäuse. Ensure the Roco cable 10754 is not used as a connection cable for the Master Lokmaus.
What is the dataBUS?
The dataBUS is the connection between the amplifier and the second-generation Lokmäuse. It is schematically shown in the diagram on page 2. A Lokmaus 2® must be connected to the Master port of the amplifier to act as the master. Only one Lokmaus 2® can be connected to the Master port. All devices connected to the Slave port automatically receive the Slave status. The Master Lokmaus 2® stores switch settings for the switch keyboard 10770 or RouteControl 10772.
What functions work only on the Master?
Important system functions such as managing Smart-Search addresses, storing basic settings, and storing switch positions for the switch keyboard or RouteControl are only available on the Master Lokmaus 2®. Ensure the Master Lokmaus 2® remains the master to retain these settings after switching.
How to change the speed step mode?
You can set the Lokmaus 2® to communicate with all locomotives using 14, 28, or 128 speed steps, or individual locomotive addresses with different modes. By default, it uses 28 speed steps. You can change this in the settings menu C6. The Lokmaus 2® stores the selected speed step mode, which remains even after power loss. Ensure the Lokdecoder is set to the same speed step mode as the Lokmaus 2® to avoid malfunction.
How to program the Lokmaus 2®?
The Lokmaus 2® supports both standard and expert programming modes. In standard mode, you can program locomotive addresses, acceleration voltage, acceleration and braking delay, maximum speed, and CV29. In expert mode, you can program all other important settings (CVs 01 to 99 with values 00 to 99). Programming should be done on a separate programming track, unless only one digital locomotive or switch decoder is connected.
What is the Smart Search function?
The Smart Search function helps you quickly locate previously used locomotive addresses. Every address you use during play is stored in the Smart Search list. When you start a search using the 'up' or 'down' keys, the search stops briefly at each address in the list. The length of the Smart Search list is defined in the settings menu, with a maximum of 22 addresses.